Yazar "Scheller, Frieder W." seçeneğine göre listele
Listeleniyor 1 - 20 / 22
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Au-Pt nanoparticles based molecularly imprinted nanosensor for electrochemical detection of the lipopeptide antibiotic drug Daptomycin(2020) Yarman, Aysu; Özçelikay, Göksu; Kurbanoğlu, Sevinç; Scheller, Frieder W.; Ozkan, Sibel A.In this work, a novel electrochemical molecularly imprinted polymer (MIP) sensor for the detection of the lipopeptide antibiotic Daptomycin (DAP) is presented which integrates gold decorated platinum nanoparticles (Au-Pt NPs) into the nanocomposite film. The sensor was prepared by electropolymerization of o-phenylenediamine (o-PD) in the presence of DAP using cyclic voltammetry. Cyclic voltammetry and differential pulse voltammetry were applied to follow the changes in the MIP-layer related to rebinding and removal of the target DAP by using the redox marker [Fe(CN)6] 3?/4– . Under optimized operational conditions, the MIP/Au-Pt NPs/ GCE nanosensor exhibits a linear response in the range of 1-20 pM towards DAP. The limit of detection and limit of quantification were determined to be 0.161pM ± 0.012 and 0.489pM ± 0.012, respectively. The sensitivity towards the antibiotics Vancomycin and Erythromycin and the amino acids glycine and tryptophan was below 7 percent as compared with DAP. Moreover, the nanosensor was also successfully used for the detection of DAP in deproteinated human serum samples.Öğe Öğe Electrochemical MIP sensor for butyrylcholinesterase(Mdpi, 2019) Özçelikay, Göksu; Kurbanoğlu, Sevinç; Zhang, Xiaorong; Söz, Çağla; Wollenberger, Ulla; Özkan, Sibel Ayşıl; Scheller, Frieder W.Molecularly imprinted polymers (MIPs) mimic the binding sites of antibodies by substituting the amino acid-scaffold of proteins by synthetic polymers. In this work, the first MIP for the recognition of the diagnostically relevant enzyme butyrylcholinesterase (BuChE) is presented. The MIP was prepared using electropolymerization of the functional monomer o-phenylenediamine and was deposited as a thin film on a glassy carbon electrode by oxidative potentiodynamic polymerization. Rebinding and removal of the template were detected by cyclic voltammetry using ferricyanide as a redox marker. Furthermore, the enzymatic activity of BuChE rebound to the MIP was measured via the anodic oxidation of thiocholine, the reaction product of butyrylthiocholine. The response was linear between 50 pM and 2 nM concentrations of BuChE with a detection limit of 14.7 pM. In addition to the high sensitivity for BuChE, the sensor responded towards pseudo-irreversible inhibitors in the lower mM range.Öğe Electrochemical MIP sensors for environmental analysis(Springer, 2023) Yarman, Aysu; Kurbanoğlu, Sevinç; Zhang, Xiaorong; Scheller, Frieder W.[Özet yok]Öğe Electrochemical MIP-sensors for drugs(Bentham Science Publ Ltd, 2018) Yarman, Aysu; Kurbanoğlu, Sevinç; Jetzschmann, Katharina J.; Özkan, Sibel A.; Wollenberger, Ulla; Scheller, Frieder W.In order to replace bio-macromolecules by stable synthetic materials in separation techniques and bioanalysis biomimetic receptors and catalysts have been developed: Functional monomers are polymerized together with the target analyte and after template removal cavities are formed in the "molecularly imprinted polymer" (MIP) which resemble the active sites of antibodies and enzymes. Starting almost 80 years ago, around 1,100 papers on MIPs were published in 2016. Electropolymerization allows to deposit MIPs directly on voltammetric electrodes or chips for quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). For the readout of MIPs for drugs amperometry, differential pulse voltammetry (DPV) and impedance spectroscopy (EIS) offer higher sensitivity as compared with QCM or SPR. Application of simple electrochemical devices allows both the reproducible preparation of MIP sensors, but also the sensitive signal generation. Electrochemical MIP-sensors for the whole arsenal of drugs, e.g. the most frequently used analgesics, antibiotics and anticancer drugs have been presented in literature and tested under laboratory conditions. These biomimetic sensors typically have measuring ranges covering the lower nano-up to millimolar concentration range and they are stable under extreme pH and in organic solvents like nonaqueous extracts.Öğe Electrochemical readout of molecularly imprinted polymers: potentials and challenges(2020) Yarman, Aysu; Özçelikay, Göksu; Kurbanoğlu, Sevinç; Peng, Lei; Söz, Çağla; Özkan, Sibel Ayşıl; Wollenberger, Ulla; Scheller, Frieder W.Molecularly imprinted polymers (MIPs) are one of the most frequently studied alternative recognition elements in chromatography and sensorics. They are prepared by polymerizing the target analyte (socalled template) and functional monomers (in the presence or absence of cross-linkers). Subsequent removal of the template from the polymer network results in the formation of cavities with a molecular memory, which is complementary in size, shape and functionality to the template.Öğe Electrosynthesized MIPs for transferrin: Plastibodies or nano-filters?(Elsevier Advanced Technology, 2018) Zhang, Xiaorong; Yarman, Aysu; Erdossy, Julia; Katz, Sagie; Zebger, Ingo; Jetzschmann, Katharina J.; Scheller, Frieder W.Molecularly imprinted polymer (MP) nanofilrns for transferrin (Trf) have been synthesized on gold surfaces by electro-polymerizing the functional monomer scopoletin in the presence of the protein target or around pre-adsorbed Trf. As determined by atomic force microscopy (AFM) the film thickness was comparable with the molecular dimension of the target. The target (re)binding properties of the electro-synthesized MIP films was evaluated by cyclic voltammetry (CV) and square wave voltammetry (SWV) through the target-binding induced permeability changes of the MIP nanofilms to the ferricyanide redox marker, as well as by surface plasmon resonance (SPR) and surface enhanced infrared absorption spectroscopy (SEIRAS) of the immobilized protein molecules. For Trf a linear concentration dependence in the lower micromolar range and an imprinting factor of similar to 5 was obtained by SWV and SPR. Furthermore, non-target proteins including the iron-free apo-Trf were discriminated by pronounced size and shape specificity. Whilst it is generally assumed that the rebinding of the target or of cross-reacting proteins exclusively takes place at the polymer here we considered also the interaction of the protein molecules with the underlying gold transducers. We demonstrate by SWV that adsorption of proteins suppresses the signal of the redox marker even at the bare gold surface and by SEIRAS that the treatment of the MIP with proteinase K or NaOH only partially removes the target protein. Therefore, we conclude that when interpreting binding of proteins to directly MIP-covered gold electrodes the interactions between the protein and the gold surface should also be considered.Öğe Enzymes as tools in MIP-Sensors(Mdpi, 2017) Yarman, Aysu; Jetzschmann, Katharina J.; Neumann, Bettina; Zhang, Xiaorong; Wollenberger, Ulla; Cordin, Aude; Scheller, Frieder W.Molecularly imprinted polymers (MIPs) have the potential to complement antibodies in bioanalysis, are more stable under harsh conditions, and are potentially cheaper to produce. However, the affinity and especially the selectivity of MIPs are in general lower than those of their biological pendants. Enzymes are useful tools for the preparation of MIPs for both low and high-molecular weight targets: As a green alternative to the well-established methods of chemical polymerization, enzyme-initiated polymerization has been introduced and the removal of protein templates by proteases has been successfully applied. Furthermore, MIPs have been coupled with enzymes in order to enhance the analytical performance of biomimetic sensors: Enzymes have been used in MIP-sensors as tracers for the generation and amplification of the measuring signal. In addition, enzymatic pretreatment of an analyte can extend the analyte spectrum and eliminate interferences.Öğe How an ACE2 mimicking epitope-MIP nanofilm recognizes template-related peptides and the receptor binding domain of SARS-CoV-2(Royal Society of Chemistry, 2022) Zhang, Xiaorong; Waffo, Armel T.; Yarman, Aysu; Kovacs, Norbert; Bognar, Zsofia; Wollenberger, Ulla; El-Sherbiny, Ibrahim M.; Hassan, Rabeay Y. A.; Bier, Frank F.; Gyurcsanyi, Robert E; Zebger, Ingo; Scheller, Frieder W.Here we aim to gain a mechanistic understanding of the formation of epitope-imprinted polymer nanofilms using a non-terminal peptide sequence, i.e. the peptide GFNCYFP (G485 to P491) of the SARS-CoV-2 receptor binding domain (RBD). This epitope is chemisorbed on the gold surface through the central cysteine 488 followed by the electrosynthesis of a similar to 5 nm thick polyscopoletin film around the surface confined templates. The interaction of peptides and the parent RBD and spike protein with the imprinted polyscopoletin nanofilm was followed by electrochemical redox marker gating, surface enhanced infrared absorption spectroscopy and conductive AFM. Because the use of non-terminal epitopes is especially intricate, here we characterize the binding pockets through their interaction with 5 peptides rationally derived from the template sequence, i.e. implementing central single amino acid mismatch as well as elongations and truncations at its C- and N- termini. Already a single amino acid mismatch, i.e. the central Cys488 substituted by a serine, results in ca. 15-fold lower affinity. Further truncation of the peptides to tetrapeptide (EGFN) and hexapeptide (YFPLQS) results also in a significantly lower affinity. We concluded that the affinity towards the different peptides is mainly determined by the four amino acid motif CYFP present in the sequence of the template peptide. A higher affinity than that for the peptides is found for the parent proteins RBD and spike protein, which seems to be due to out of cavity effects caused by their larger footprint on the nanofilm surface.Öğe How reliable is the electrochemical readout of MIP sensors?(Sensors,, 2020) Yarman, Aysu; Scheller, Frieder W.Electrochemical methods offer the simple characterization of the synthesis of molecularly imprinted polymers (MIPs) and the readouts of target binding. The binding of electroinactive analytes can be detected indirectly by their modulating effect on the diffusional permeability of a redox marker through thin MIP films. However, this process generates an overall signal, which may include nonspecific interactions with the nonimprinted surface and adsorption at the electrode surface in addition to (specific) binding to the cavities. Redox-active low-molecular-weight targets and metalloproteins enable a more specific direct quantification of their binding to MIPs by measuring the faradaic current. The in situ characterization of enzymes, MIP-based mimics of redox enzymes or enzyme-labeled targets, is based on the indication of an electroactive product. This approach allows the determination of both the activity of the bio(mimetic) catalyst and of the substrate concentration.Öğe Imprinted Polymers on the Route to Plastibodies for Biomacromolecules (MIPs), Viruses (VIPs), and Cells (CIPs)(Springer, 2024) Yarman, Aysu; Zhang, Xiaorong; Bagheri, Mandien; El-Sherbiny, Ibrahim M.; Hassan, Rabeay Y. A.; Kurbanoğlu, Sevinç; Waffo, Armel Franklin Tadjoung; Zebger, Ingo; Karabulut, Tutku Ceren; Bier, Frank F.; Lieberzeit, Peter; Scheller, Frieder W.Around 30% of the scientific papers published on imprinted polymers describe the recognition of proteins, nucleic acids, viruses, and cells. The straightforward synthesis from only one up to six functional monomers and the simple integration into a sensor are significant advantages as compared with enzymes or antibodies. Furthermore, they can be synthesized against toxic substances and structures of low immunogenicity and allow multi-analyte measurements via multi-template synthesis. The affinity is sufficiently high for protein biomarkers, DNA, viruses, and cells. However, the cross-reactivity of highly abundant proteins is still a challenge.Öğe Insights in electrosynthesis, target binding, and stability of peptide-imprinted polymer nanofilms(2021) Yarman, Aysu; Caserta, Giorgio; Gyurcsányi, Róbert E.; Wollenberger, Ulla; Zhang, Xiaorong; Zebger, Ingo; Supala, Eszter; Scheller, Frieder W.Molecularly imprinted polymer (MIP) nanofilms have been successfully implemented for the recognition of different target molecules: however, the underlying mechanistic details remained vague. This paper provides new insights in the preparation and binding mechanism of electrosynthesized peptide-imprinted polymer nanofilms for selective recognition of the terminal pentapeptides of the ß-chains of human adult hemoglobin, HbA, and its glycated form HbA1c. To differentiate between peptides differing solely in a glucose adduct MIP nanofilms were prepared by a two-step hierarchical electrosynthesis that involves first the chemisorption of a cysteinyl derivative of the pentapeptide followed by electropolymerization of scopoletin. This approach was compared with a random single-step electrosynthesis using scopoletin/pentapeptide mixtures. Electrochemical monitoring of the peptide binding to the MIP nanofilms by means of redox probe gating revealed a superior affinity of the hierarchical approach with a Kd value of 64.6 nM towards the related target. Changes in the electrosynthesized non-imprinted polymer and MIP nanofilms during chemical, electrochemical template removal and rebinding were substantiated in situ by monitoring the characteristic bands of both target peptides and polymer with surface enhanced infrared absorption spectroscopy. This rational approach led to MIPs with excellent selectivity and provided key mechanistic insights with respect to electrosynthesis, rebinding and stability of the formed MIPsÖğe Label-Free MIP sensors for protein biomarkers(Springer, 2017) Zhang, Xiaorong; Jetzschmann, Katharina; Yarman, Aysu; Scheller, Frieder W.; Wollenberger, Ulla[Özet yok]Öğe MIPs and aptamers for recognition of proteins in biomimetic sensing(Mdpi, 2016) Menger, Marcus; Yarman, Aysu; Erdossy, Julia; Yıldız, Hüseyin Bekir; Gyurcsanyi, Robert E.; Scheller, Frieder W.Biomimetic binders and catalysts have been generated in order to substitute the biological pendants in separation techniques and bioanalysis. The two major approaches use either "evolution in the test tube" of nucleotides for the preparation of aptamers or total chemical synthesis for molecularly imprinted polymers (MIPs). The reproducible production of aptamers is a clear advantage, whilst the preparation of MIPs typically leads to a population of polymers with different binding sites. The realization of binding sites in the total bulk of the MIPs results in a higher binding capacity, however, on the expense of the accessibility and exchange rate. Furthermore, the readout of the bound analyte is easier for aptamers since the integration of signal generating labels is well established. On the other hand, the overall negative charge of the nucleotides makes aptamers prone to non-specific adsorption of positively charged constituents of the sample and the "biological" degradation of non-modified aptamers and ionic strength-dependent changes of conformation may be challenging in some application.Öğe Molecular LEGO by domain-imprinting of cytochrome P450 BM3(Elsevier Science Bv, 2018) Jetzschmann, Katharina J.; Yarman, Aysu; Rustam, L.; Kielb, P.; Urlacher, V. B.; Fischer, A.; Scheller, Frieder W.Hypothesis: Electrosynthesis of the MIP nano-film after binding of the separated domains or holocytochrome BM3 via an engineered anchor should result in domain-specific cavities in the polymer layer. Experiments: Both the two domains and the holo P450 BM3 have been bound prior polymer deposition via a N-terminal engineered his6-anchor to the electrode surface. Each step of MIP preparation was characterized by cyclic voltammetry of the redox-marker ferricyanide. Rebinding after template removal was evaluated by quantifying the suppression of the diffusive permeability of the signal for ferricyanide and by the NADH-dependent reduction of cytochrome c by the reductase domain (BMR). Findings: The working hypothesis is verified by the discrimination of the two domains by the respective MIPs: The holoenzyme P450 BM3 was ca. 5.5 times more effectively recognized by the film imprinted with the oxidase domain (BMO) as compared to the BMR-MIP or the non-imprinted polymer (NIP). Obviously, a cavity is formed during the imprinting process around the hiss-tag-anchored BMR which cannot accommodate the broader BMO or the P450 BM3. The affinity of the MIP towards P450 BM3 is comparable with that to the monomer in solution. The hiss-tagged P450 BM3 binds (30 percent) stronger which shows the additive effect of the interaction with the MIP and the binding to the electrode. (C) 2018 Published by Elsevier B.V.Öğe Molekularer abdruck oder selektion bei der erzeugung biomimetischer specifyer(Springer, 2023) Oktay, Aysel; Menger, Marcus M.; Yarman, Ayşe; Scheller, Frieder W.Zum Ersatz oder auch zur Ergänzung von Antikörpern für niedermolekulare Substanzen wie Antibiotika, Umweltgifte und Pharmaka, aber auch für Proteinbiomarker, Viren und Mikroorganismen in Trennungstechniken, Diagnostik und Therapie, wurden Binder moleküle auf der Basis von Oligonukleotiden (Aptamere) mittels des SELEXVerfahrens und voll synthetische „Molekular Geprägte (Imprinted) Polymere“ (MIPs) entwickelt. Diese Specifyer können ohne Versuchstiere hergestellt werden und erreichen zu Antikörpern vergleichbare Affi nitäten. Sie konnten bereits in zahlreiche Applikationen transferiert werden, aber ihre Synthesekonzepte – Abformung vs. Selektion – können aufgrund ihrer jeweiligen Molekülbasis unterschiedlicher kaum sein.Öğe “Out of pocket” protein binding—A dilemma of epitope imprinted polymers revealed for human hemoglobin(2021) Zhang, Xiaorong; Caserta, Giorgio; Supala, Eszter; Wollenberger, Ulla; Gyurcsányi, Róbert E.; Zebger, Ingo; Scheller, Frieder W.; Yarman, AysuThe epitope imprinting approach applies exposed peptides as templates to synthesize Molecularly Imprinted Polymers (MIPs) for the recognition of the parent protein. While generally the template protein binding to such MIPs is considered to occur via the epitope-shaped cavities, unspecific interactions of the analyte with non-imprinted polymer as well as the detection method used may add to the complexity and interpretation of the target rebinding. To get new insights on the effects governing the rebinding of analytes, we electrosynthesized two epitope-imprinted polymers using the N-terminal pentapeptide VHLTP-amide of human hemoglobin (HbA) as the template. MIPs were prepared either by single-step electrosynthesis of scopoletin/pentapeptide mixtures or electropolymerization was performed after chemisorption of the cysteine extended VHLTP peptide. Rebinding of the target peptide and the parent HbA protein to the MIP nanofilms was quantified by square wave voltammetry using a redox probe gating, surface enhanced infrared absorption spectroscopy, and atomic force microscopy. While binding of the pentapeptide shows large influence of the amino acid sequence, all three methods revealed strong non-specific binding of HbA to both polyscopoletin-based MIPs with even higher affinities than the target peptides.Öğe Peptide epitope-imprinted polymer microarrays for selective protein recognition. Application for SARSCoV-2 RBD protein(2022) Yarman, Aysu; Bognar, Zso´fia; Supala, Eszter; Zhang, Xiaorong; Bier, Frank F.; Scheller, Frieder W.; Gyurcsanyi, Robert E.We introduce a practically generic approach for the generation of epitope-imprinted polymer-based microarrays for protein recognition on surface plasmon resonance imaging (SPRi) chips. The SPRi platform allows the subsequent rapid screening of target binding kinetics in a multiplexed and label-free manner. The versatility of such microarrays, both as synthetic and screening platform, is demonstrated through developing highly affine molecularly imprinted polymers (MIPs) for the recognition of the receptor binding domain (RBD) of SARS-CoV-2 spike protein. A characteristic nonapeptide GFNCYFPLQ from the RBD and other control peptides were microspotted onto gold SPRi chips followed by the electrosynthesis of a polyscopoletin nanofilm to generate in one step MIP arrays. A single chip screening of essential synthesis parameters, including the surface density of the template peptide and its sequence led to MIPs with dissociation constants (KD) in the lower nanomolar range for RBD, which exceeds the affinity of RBD for its natural target, angiotensin-convertase 2 enzyme. Remarkably, the same MIPs bound SARS-CoV-2 virus like particles with even higher affinity along with excellent discrimination of influenza A (H3N2) virus. While MIPs prepared with a truncated heptapeptide template GFNCYFP showed only a slightly decreased affinity for RBD, a single mismatch in the amino acid sequence of the template, i.e. the substitution of the central cysteine with a serine, fully suppressed the RBD binding.Öğe Present state of MIP-based sensors for SARS-CoV-2(Elsevier, 2022) Yarman, Aysu; Kurbanoğlu, Sevinç; Scheller, Frieder W.[Özet yok]Öğe Quantum dot-based electrochemical molecularly imprinted polymer sensors: potentials and challenges(Elsevier, 2021) Yarman, Aysu; Kurbanoğlu, Sevinç; Erkmen, Cem; Uslu, Bengi; Scheller, Frieder W.[Özet yok]
