Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams

Basit Öğe Kaydı
dc.contributor.authorMahmutyazıcıoğlu, Nazım
dc.contributor.authorAlbayrak, Önder
dc.contributor.authorİpekoğlu, Mehmet
dc.contributor.authorAltıntaş, Sabri
dc.date.accessioned2021-01-08T21:51:29Z
dc.date.available2021-01-08T21:51:29Z
dc.date.issued2013
dc.departmentTAÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionIpekoglu, Mehmet/0000-0002-0019-3346; Albayrak, Onder/0000-0001-5918-3858en_US
dc.descriptionWOS:000324328900035en_US
dc.description.abstractIn this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ceramic reinforcement) were produced. The effects of both different ratios of Al2O3 particle addition and different kinds of heat treatment on hardenability, structure and mechanical behavior of the final foams were investigated. Foams that were fully heat treated had the highest hardness values, and they performed best with an increase in collapse strength up to 100% over the untreated samples. Improved cell structure and decreased drainage were obtained when the Al2O3 addition was not more than 5 vol%. The compression test results were interpreted in terms of the foam's microstructure, and correlations were made relating to the unloading modulus and compression strength of the foams to the relative density.
dc.description.sponsorshipTurkish State Planning Agency [DPT-03K120250]; Bogazici University Scientific Research ProjectsBogazici University [BAP-07A603D]
dc.description.sponsorshipThis work was supported in part by the Turkish State Planning Agency (DPT-03K120250) and Bogazici University Scientific Research Projects (BAP-07A603D).
dc.identifier.doi10.1557/jmr.2013.187
dc.identifier.endpage2519en_US
dc.identifier.issn0884-2914
dc.identifier.issue17en_US
dc.identifier.scopus2-s2.0-84888384592
dc.identifier.scopusqualityQ2
dc.identifier.startpage2509en_US
dc.identifier.urihttp://doi.org/10.1557/jmr.2013.187
dc.identifier.urihttps://hdl.handle.net/20.500.12846/305
dc.identifier.volume28en_US
dc.identifier.wosWOS:000324328900035
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorİpekoğlu, Mehmet
dc.language.isoen
dc.publisherCambridge Univ Press
dc.relation.ispartofJournal Of Materials Research
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.titleEffects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
0305.pdf
Boyut:
1.06 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu