Başlık için Malzeme Bilimi ve Teknolojileri listeleme
Toplam kayıt 76, listelenen: 17-36
-
Effect of severe plastic deformation on the precipitation kinetics and the properties of CuCoNiBe alloys
(Elsevier, 2022)The effect of the precipitation hardening by means of the conventional heat treatment and the combined thermomechanical treatment (i.e., equal channel angular pressing (ECAP) with subsequent aging) on the electrical ... -
Effect of soft segment molecular weight on tensile properties of poly(propylene oxide) based polyurethaneureas
(Elsevier, 2012)Influence of soft segment molecular weight and hard segment content on the morphology, thermomechanical and tensile properties of homologous polyurethaneurea copolymers based on narrow molecular weight poly(propylene ... -
Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites
(Wiley, 2019)Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt ... -
Effect of water absorption and hydroxyapatite addition on mechanical and microstructural properties of dental luting cements
(Walter de Gruyter, 2022)In recent years, dental cements have gained more and more importance due to the increasing clinical expectations. They are used as restorative materials and as materials providing critical functions such as chemical and ... -
Effects of different bonding agents on the shear bond strength between monolithic zirconia and indirect composite
(2023)Purpose: To investigate the effects of different bonding agents and application of glaze on the shear bond strength (SBS) between monolithic zirconia (MZ) and indirect composite (IC). Materials and Methods: Five different ... -
Electrochemical MIP sensor for butyrylcholinesterase
(Mdpi, 2019)Molecularly imprinted polymers (MIPs) mimic the binding sites of antibodies by substituting the amino acid-scaffold of proteins by synthetic polymers. In this work, the first MIP for the recognition of the diagnostically ... -
Electrochemical readout of molecularly imprinted polymers: potentials and challenges
(2020)Molecularly imprinted polymers (MIPs) are one of the most frequently studied alternative recognition elements in chromatography and sensorics. They are prepared by polymerizing the target analyte (socalled template) and ... -
Estimation of yttrium oxide microstructural parameters using the Williamson-Hall analysis
(Taylor & Francis Ltd, 2018)Yttrium oxide (Y2O3) particles were synthesised from a yttrium nitrate solution via ultrasonic spray pyrolysis (USP) method. The effects of temperature and precursor concentration on morphology and microstructural parameters ... -
Eş kanallı açısal pres (EKAP) yöntemi ile şekillendirilmiş Ti-6Al-4V alaşımının mekanik özellikleri ve makroskobik deformasyon davranışı arasındaki ilişki
(2020)Bu çalışmada, Ti-6Al-4V alaşımının kaba taneli ve eşit kanallı açısal presleme (EKAP) ile üretilen ultra ince taneli durumda, quasi-statik tek eksenli çekme yüklemesi altında (yaklaşık 10-3 s-1 deformasyon hızı ile) ... -
Fabrication and characterization of Yb-doped Y2O3 powders and thin films
(Carl Hanser Verlag, 2020)Yttrium oxide (Y2O3) and ytterbium (Yb)-doped Y2O3 particles were synthesized via the sol-gel method from the aqueous solution of their nitrate salts. The synthesized powders were then deposited on Corning glass substrates ... -
From superhydrophilic to superhydrophobic: tunable wetting of polymer surfaces through the use of fumed silica
(2016)A simple process and a general method was developed for the preparation of polymeric materials with controlled surface wettability. Method is applicable to a wide range of polymeric materials, thermoplastic or thermoset. ... -
Fumed silica filled poly(dimethylsiloxane-urea) segmented copolymers: Preparation and properties
(Elsevier, 2011)Novel fumed silica filled thermoplastic poly(dimethylsiloxane-urea) (TPSU) segmented copolymers were synthesized and characterized. TPSU copolymers were prepared from a cycloaliphatic diisocyanate, aminopropyl terminated ... -
Hexaazatriphenylene doped carbon nitrides-biomimetic photocatalyst with superior oxidation power
(Elsevier Science Bv, 2017)Pyrazine rings are a fundamental part of folic acid and flavine - cofactors that participate in natural electron transfer processes. Electron deficient carbon nitrides, more specifically poly(heptazine imides) (PHI), ... -
Hybrid paper sheets with improved barrier properties
(Scientific & Technical Research Council Turkey-TUBITAK, 2021)Hybrid paper sheets were prepared by applying a thin coating layer of cross-linked polydimethylsiloxane (PDMS) and inorganic particles onto Whatman Grade 1 filter paper substrates. Several coatings with different inorganic ... -
Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis
(Taylor & Francis, 2022)Efficient recovery of rare earth elements (REEs) from scrap NdFeB magnets is a significant requirement for a circular economy. Therefore, the development of a cost-effective and environmentally friendly leaching process ... -
In vitro bioactivity of laser surface-treated Ti6Al4V alloy
(Springer, 2019)The effects of lasing parameters on the precipitation of hydroxyapatite (HA) on the commercial Ti6Al4Valloy in simulated body fluid (SBF) were investigated. Ti6Al4V plates were polished and ultrasonically cleaned in acetone ... -
In-situ photochemical synthesis and dielectric properties of nanocomposite thin films containing Au, Ag and MnO nanoparticles
(Elsevier, 2021)Thioxanthone-Anthracene (TX-A) was used as a one-component Type II photoinitiator for the photopolymerization of PEGMEA/PEGDA monomer mixture consisting of AgNO3, HAuCl4 and MnCl2 metallic salts. In this study, we have ... -
Influence of coating method on the formation of superhydrophobic silicone-urea surfaces modified with fumed silica nanoparticles
(2015)Effect of the coating method on the formation of superhydrophobic polydimethylsiloxane-urea (TPSC) copolymer surfaces, modified by the incorporation of hydrophobic fumed silica nanoparticles were investigated. Four different ... -
Influence of different irrigation solutions on the push-out bond strength of fiber posts to root dentin and root canal dentin microhardness: methodological study
(Türkiye Klinikleri Diş Hekimliği Bilimleri Dergisi, 2023)This study aimed to compare the effect of sodium hypochlorite (NaOCl), chlorhexidine (CHX), ethylene diamine tetra acetic acid (EDTA) and etidronic acid (HEBP) solutions and their combinations on a push-out bond strength ... -
Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through layer-by-layer spin-coating with hydrophobic fumed silica
(Elsevier, 2015)Formation of superhydrophobic polymer surfaces were investigated through successive spin-coating of hydrophobic fumed silica dispersed in an organic solvent onto polymer films. Two different polymers, a hydrophobic segmented ...
