Erişim şekli için "info:eu-repo/semantics/closedAccess" Malzeme Bilimi ve Teknolojileri listeleme
Toplam kayıt 38, listelenen: 1-20
-
Assessment on the stable and high capacity Na-Se batteries with carbonate electrolytes
(Wiley, 2022)Factors affecting proper functioning of Na-Se system are investigated focusing on the polyselenide formation in ether- and carbonate-based electrolytes. To do so, Se cathode is prepared by ball milling with commercial ... -
Development of a nonwetting coating for packaging substrate surfaces using a novel and easy to implement method
(Walter de Gruyter, 2021)This study is about preparing different paper substrates with chemically stable hydrophobic and superhydrophobic surface coatings through spraying a mixture of poly(dimethylsiloxane) (PDMS) and inorganic particles. The ... -
Development of biomimetic hydroxyapatite containing dental restorative composites
(Springer, 2022)The aim of the study was to evaluate the incorporation effect of biomimetic hydroxyapatite (BHA) particles on the mechanical properties of experimental dental composites. Two experimental composites were produced from the ... -
DNA groove binder and significant cytotoxic activity on human colon cancer cells: Potential of a dimeric zinc (II) phthalocyanine derivative
(2023)The interaction of a multi-component system consisting of benzene-1,4-diyldimethanimine-bridged dimeric zinc-phthalocyanine groups (4OMPCZ) with calf thymus DNA (ct-DNA) was investigated using UV-Vis absorption, fluorescence ... -
Effect of filler content on the structure-property poly(ethylene oxide) based polyurethaneurea-silica nanocomposites
(Wiley, 2017)Poly(ethylene oxide) (PEO) based polyurethaneurea‐silica nanocomposites were prepared by solution blending and characterized by Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Differential Scanning ... -
Effect of severe plastic deformation on the precipitation kinetics and the properties of CuCoNiBe alloys
(Elsevier, 2022)The effect of the precipitation hardening by means of the conventional heat treatment and the combined thermomechanical treatment (i.e., equal channel angular pressing (ECAP) with subsequent aging) on the electrical ... -
Effect of soft segment molecular weight on tensile properties of poly(propylene oxide) based polyurethaneureas
(Elsevier, 2012)Influence of soft segment molecular weight and hard segment content on the morphology, thermomechanical and tensile properties of homologous polyurethaneurea copolymers based on narrow molecular weight poly(propylene ... -
Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites
(Wiley, 2019)Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt ... -
Effect of water absorption and hydroxyapatite addition on mechanical and microstructural properties of dental luting cements
(Walter de Gruyter, 2022)In recent years, dental cements have gained more and more importance due to the increasing clinical expectations. They are used as restorative materials and as materials providing critical functions such as chemical and ... -
Estimation of yttrium oxide microstructural parameters using the Williamson-Hall analysis
(Taylor & Francis Ltd, 2018)Yttrium oxide (Y2O3) particles were synthesised from a yttrium nitrate solution via ultrasonic spray pyrolysis (USP) method. The effects of temperature and precursor concentration on morphology and microstructural parameters ... -
Fabrication and characterization of Yb-doped Y2O3 powders and thin films
(Carl Hanser Verlag, 2020)Yttrium oxide (Y2O3) and ytterbium (Yb)-doped Y2O3 particles were synthesized via the sol-gel method from the aqueous solution of their nitrate salts. The synthesized powders were then deposited on Corning glass substrates ... -
Fumed silica filled poly(dimethylsiloxane-urea) segmented copolymers: Preparation and properties
(Elsevier, 2011)Novel fumed silica filled thermoplastic poly(dimethylsiloxane-urea) (TPSU) segmented copolymers were synthesized and characterized. TPSU copolymers were prepared from a cycloaliphatic diisocyanate, aminopropyl terminated ... -
Hexaazatriphenylene doped carbon nitrides-biomimetic photocatalyst with superior oxidation power
(Elsevier Science Bv, 2017)Pyrazine rings are a fundamental part of folic acid and flavine - cofactors that participate in natural electron transfer processes. Electron deficient carbon nitrides, more specifically poly(heptazine imides) (PHI), ... -
Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis
(Taylor & Francis, 2022)Efficient recovery of rare earth elements (REEs) from scrap NdFeB magnets is a significant requirement for a circular economy. Therefore, the development of a cost-effective and environmentally friendly leaching process ... -
In-situ photochemical synthesis and dielectric properties of nanocomposite thin films containing Au, Ag and MnO nanoparticles
(Elsevier, 2021)Thioxanthone-Anthracene (TX-A) was used as a one-component Type II photoinitiator for the photopolymerization of PEGMEA/PEGDA monomer mixture consisting of AgNO3, HAuCl4 and MnCl2 metallic salts. In this study, we have ... -
Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through layer-by-layer spin-coating with hydrophobic fumed silica
(Elsevier, 2015)Formation of superhydrophobic polymer surfaces were investigated through successive spin-coating of hydrophobic fumed silica dispersed in an organic solvent onto polymer films. Two different polymers, a hydrophobic segmented ... -
Influence of the coating method on the formation of superhydrophobic silicone–urea surfaces modified with fumed silica nanoparticles
(Elsevier, 2015)Effect of the coating method on the formation of superhydrophobic polydimethylsiloxane–urea copolymer (TPSC) surfaces, modified by the incorporation of hydrophobic fumed silica nanoparticles was investigated. Four different ... -
Investigation of Cu whisker growth by molecular beam epitaxy
(Walter de Gruyter, 2021)There is a trend towards smaller and smaller structures (nanostructures/miniaturization) which is well known in microelectronic, energy and semiconductor applications. Nanoengineering is expected to lead to significant ... -
Investigation of the effect of light fastness on the color changes of maps prepared by electrophotographic digital printing
(Walter de Gruyter, 2022)In this study the prints were made on paper substrates, which were thought as map substrate alternatives, with 3 different surface properties at 1200 dpi by using the electrophotographic printing system. Color and gloss ... -
In–situ formation of self-assembled Ag nanoclusters on ct-DNA in the presence of 2-mercaptothioxanthone by using UV–vis light irradiation
(Elsevier, 2018)Self-assembled silver nanoparticles (Ag NPs) on calf thymus DNA (ct-DNA) chains were synthesized in the presence of 2-mercaptothioxanthone (TX-SH) by use of UV irradiation technique. Thioxanthone itself and its derivatives ...