Ara
Toplam kayıt 24, listelenen: 11-20
Applications of a pnCCD detector coupled to columnar structure CsI(Tl) scintillator system in ultra high energy X-ray Laue diffraction
(Iop Publishing Ltd, 2017)
Most charge coupled devices (CCDs) are made of silicon (Si) with typical active layer thicknesses of several microns. In case of a pnCCD detector the sensitive Si thickness is 450 mu m. However, for silicon based detectors ...
Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing
(Springer London Ltd, 2020)
A metal component fabricated by additive manufacturing (AM) is generally required to be heat treated to enhance microstructural and mechanical aspects. This present study aims to contribute to the literature in understanding ...
Cooperative quadrature spatial modulation with Euclidean distance and capacity optimized antenna selection
(Wiley, 2021)
In this study, new cooperative-quadrature spatial modulation techniques based on Euclidean distance and capacity optimized antenna selection techniques (EDAS-CQSM and COAS-CQSM) are proposed for cooperative communication ...
Foams of gray cast iron as efficient energy absorption structures: a feasibility study
(Wiley-V C H Verlag Gmbh, 2019)
Gray cast iron foams, were produced using a reticulated polyurethane by using a modified investment casting process. To evaluate the attributes of the produced micro-geometries, foam segments and single struts are investigated ...
Design criteria for a high energy Compton Camera and possible application to targeted cancer therapy
(Iop Publishing Ltd, 2015)
The proposed research focuses on the design criteria for a Compton Camera with high spatial resolution and sensitivity, operating at high gamma energies and its possible application for molecular imaging. This application ...
A lyapunov based model reference adaptive control of a quadrotor
(Ieee, 2017)
Model reference adaptive controller is proposed to control the position of a quadrotor with uncertain model parameters. The controller design procedure is provided considering position and attitude dynamics as outer and ...
An adaptive block backstepping controller for a quadrotor
(Ieee, 2018)
An adaptive block backstepping controller is proposed to control the position of a quadrotor with uncertain model parameters. The controller design procedure is provided considering the stability of six blocks involving ...
Drilling process and resulting surface properties of Inconel 718 alloy fabricated by selective laser melting additive manufacturing
(Elsevier B.V., 2020)
One of the challenges is to produce holes with expected dimensional accuracy in metal additive manufacturing. Although post-processing is usually carried out for the additively manufactured components but improving the ...
In situ shear behavior of open-cell austenitic 316L steel foams
(Elsevier Science Sa, 2020)
Foam cores in crash boxes are subjected to large shear forces during crash situations. Here, the failure behavior of 316L open-cell stainless steel foams under shearing conditions was investigated. A custom-made grip system ...
Micro and nano damage observations of martensitic and austenitic open cell cast foams
(Elsevier Science, 2022)
In current study a detailed investigation of the 304 austenitic and 420 martensitic foams damage has been carried out at all hierarchical levels. In-situ compression testing of foams and microtensile testing of single ...