Effects of different bonding agents on the shear bond strength between monolithic zirconia and indirect composite

Basit Öğe Kaydı
dc.contributor.authorMergen, Elif Saracoğlu
dc.contributor.authorCömert, Zekeriya Yaşar
dc.contributor.authorİşsever, Dilara Şeyma Alpkılıç
dc.contributor.authorKeleşoğlu, Ergün
dc.contributor.authorDeğer, Sabire İşler
dc.date.accessioned2024-05-10T11:46:16Z
dc.date.available2024-05-10T11:46:16Z
dc.date.issued2023
dc.departmentTAÜ, Fen Fakültesi, Malzeme Bilimi ve Teknolojileri Bölümüen_US
dc.description.abstractPurpose: To investigate the effects of different bonding agents and application of glaze on the shear bond strength (SBS) between monolithic zirconia (MZ) and indirect composite (IC). Materials and Methods: Five different bonding agents (G-Premio Bond [GP]; Tokuyama Universal Bond [TU]; Signum Zirconia bond [SZ]; Clearfil Ceramic Primer Plus [CCP]; Z-Prime Plus [ZP]) were applied to a total of 200 MZ disk-shaped specimens (n = 100 glazed and 100 nonglazed). Half of the specimens then underwent thermocycling and the other half no thermocycling (n = 10 specimens each subgroup). The experimental setup was prepared as two pieces according to the ISO TR 11405 standards. Specimens embedded in acrylic resin were placed into the experimental setup and a universal testing machine at a crosshead speed of 0.5 mm/minute. Mann-Whitney U test and Kruskal-Wallis test were used for statistical analyses. Bonferroni correction was then performed, and test results with P < .05 were accepted as statistically significant. Results: The application of glaze significantly enhanced SBS when ZP or CCP was used; however, it did not have any significant effect when GP, TU, or SZ were used. Thermocycling significantly decreased the SBS in all bonding agent groups except GP specimens with glaze (P = .16). The highest SBS in all conditions was noted when GP and TU were used. Conclusions: These findings suggest that the bonding agents GP and TU may be recommended for better bonding between MZ and IC.
dc.identifier.citationMergen, Elif S., Cömert, Zekeriya Y., İşsever, Dilara Şeyma A., Keleşoğlu, E., Değer, Sabire İ. (2023). Effects of different bonding agents on the shear bond strength between monolithic zirconia and indirect composite. The International Journal of Prosthodontics, 4.
dc.identifier.doi10.11607/ijp.8340
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85171119478
dc.identifier.urihttps://www.quintessence-publishing.com/usa/en/article/4391381/the-international-journal-of-prosthodontics/2023/04/effects-of-different-bonding-agents-on-the-shear-bond-strength-between-monolithic-zirconia-and-indirect-composite
dc.identifier.urihttps://hdl.handle.net/20.500.12846/1236
dc.identifier.wosWOS:001155245300005
dc.indekslendigikaynakWeb of Science
dc.language.isoen
dc.relation.ispartofThe International Journal of Prosthodontics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.titleEffects of different bonding agents on the shear bond strength between monolithic zirconia and indirect composite
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Malzeme Bilimi ve Teknolojileri
WoS İndeksli Yayınlar Koleksiyonu