Dimensional accuracy analysis of samples printed in delta and cartesian kinematic three dimensional printers

Basit Öğe Kaydı
dc.authorid0000-0002-2982-8405
dc.contributor.authorİncekar, Erkan
dc.contributor.authorKaygısz, Hüseyin
dc.contributor.authorBabur, Sebahattin
dc.date.accessioned2021-12-24T08:39:06Z
dc.date.available2021-12-24T08:39:06Z
dc.date.issued2021
dc.departmentTAÜen_US
dc.description.abstractThe motion mechanisms of manufacturing and robotic systems are developed in different structures, mainly in cartesian and delta structures having series or parallel movement abilities according to the capacity and construction structure of the system. Different systems are used according to the criteria such as bearing load capacity, sensitivity or cost of the system. In this study, the performances of machines installed in the delta and cartesian kinematic structures, which are mostly used in the kinematic systems of three - dimensional printers, were analyzed. In this context, in two different machines with these two construction structures, the same boundary conditions and 4 pieces of calibration parts especially in manufacturing features were printed. 23 different elements that constituted the calibration part were measured, tabulated, statistically analyzed, and the acceptable measuremental tolerance ranges of the elements were determined and the accuracy values of the machines were compared. As a result of this study, according to T test results, 15 of the 23 measurements on the Cartesian system based three-dimensional printers were obtained as acceptable in terms of tolerance range as well as 9 of the 23 different measurements were obtained as acceptable on Delta system. Consequently, operation accuracy of the Cartesian system based three-dimensional printers were higher than the Delta system under the same working conditions and manufacturing parameters.
dc.identifier.citationİncekar E., Kaygısız H. ve Babur S., “Dimensional accuracy analysis of samples printed in delta and cartesian kinematic three dimensional printers”, Politeknik Dergisi, 24(2): 529-537, (2021).
dc.identifier.doi10.2339/politeknik.582410
dc.identifier.endpage537en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue2en_US
dc.identifier.startpage529en_US
dc.identifier.trdizinid424271
dc.identifier.urihttps://hdl.handle.net/20.500.12846/610
dc.identifier.volume24en_US
dc.identifier.wosWOS:000661468600020
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.institutionauthorBabur, Sebahattin
dc.language.isoen
dc.publisherGazi Üniversitesi
dc.relation.ispartofPoliteknik Dergisi
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectAccuracy Measurementen_US
dc.subjectDelta Printeren_US
dc.subjectCartesian Printeren_US
dc.subjectGenauigkeitsmessungen_US
dc.subjectKartesischer Druckeren_US
dc.subjectDelta Druckeren_US
dc.subjectDoğruluk Ölçümüen_US
dc.subjectDelta Yazıcıen_US
dc.subjectKartezyen Yazıcıen_US
dc.titleDimensional accuracy analysis of samples printed in delta and cartesian kinematic three dimensional printers
dc.title.alternativeDelta ve kartezyen kinematik yapılı üç boyutlu yazıcılarda basılan numunelerin boyutsal doğruluk analizi
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
babur.pdf
Boyut:
792.14 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

İdari Birimler Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu