Ara
Toplam kayıt 60, listelenen: 51-60
Experimental study of the impact of electrospinning parameters on the electromechanical properties of strain sensitive electrospun multiwalled carbon nanotubes/ thermoplastic polyurethane nanofibers
(Taylor & Francis, 2021)
Flexible strain sensitive electrospun fibrous layers have attracted widespread attention of researchers owing to their large surface area and exceptional flexibility. Herein, a detailed research on the impact of electrospinning ...
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)
Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ...
Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach
(Wiley, 2018)
Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non-toxic, co-solvent ES was performed to obtain core-shell ...
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)
Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ...
Assessment of liquefaction potential during earthquakes by using SPT-number of blows and two-dimensional finite element analyses
(Springer, 2022)
For the planning and design of buildings in earthquake zones with high groundwater levels, the liquefaction potential of the building site has to be investigated and evaluated. In DIN EN 1998-5:2010-12 (2010), the diagrams ...
Four Women in the Harem (1965) by Halit Refiğ: the construction of "national cinema"
(Univ Illinois Press, 2019)
[Özet Yok]
Synthesis of one-component type II dithioxanthone-disulfide photoinitiator and investigation of photophysical and photochemical properties
(Elsevier, 2021)
Herein, we report the successful synthesis of dithioxanthone-disulfide [TX-S-](2) as a new one-component type II photoinitiator. Photophysical properties of [TX-S-](2) in terms of fluorescence and phosphorescence properties ...
Tension-compression asymmetry of quadruple CuCoNiBe alloys processed by high-temperature multi-pass equal channel angular pressing (ECAP)
(Walter de Gruyter, 2022)
Among copper alloys, the precipitation (age) hardening quadruple CuCoNiBe alloys due to their superior mechanical properties in terms of the highest strength and elasticity achieved by peak aging have been used over the ...
Investigation of the effect of light fastness on the color changes of maps prepared by electrophotographic digital printing
(Walter de Gruyter, 2022)
In this study the prints were made on paper substrates, which were thought as map substrate alternatives, with 3 different surface properties at 1200 dpi by using the electrophotographic printing system. Color and gloss ...
Assessment on the stable and high capacity Na-Se batteries with carbonate electrolytes
(Wiley, 2022)
Factors affecting proper functioning of Na-Se system are investigated focusing on the polyselenide formation in ether- and carbonate-based electrolytes. To do so, Se cathode is prepared by ball milling with commercial ...