Güncel Gönderiler: Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed
Toplam kayıt 483, listelenen: 461-480
-
Enhancement of galena-potassium ethyl xanthate flotation system by low power ultrasound
(Elsevier, 2020)The objective of this study is to investigate the improvement possibilities of the floatability of galena with ultrasonic application in the presence of potassium ethyl xanthate (KEX). For this purpose, micro-flotation ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
A constitutive model for hysteresis: the continuum damage approach for filled rubber-like materials
(Springer, 2020)In this contribution, a constitutive model is proposed for filled rubber-like materials to describe hysteresis. The model is based on the network decomposition concept. Rubber matrix is decomposed into purely elastic and ... -
Stiffening of biopolymer aerogel networks upon wetting: a model-based study
(Elsevier, 2020)The mechanism behind the stiffening effect observed in the stress-strain response of alginate-starch aerogels upon being exposed to wetting is investigated in this paper, via a physically motivated model approach. A network ... -
Operational excellence in a green supply chain for environmental management: a case study
(Wiley, 2020)Nowadays, organizations have started to become more conscious about the environment in their supply chain operations. The greening process has guided supply chain practices into new ways of thinking according to green ... -
Stress, strain and strain-rate cemented carbide properties determined with a fem-supported evaluation of impact test imprints
(Elsevier Sci Ltd, 2021)Cemented carbide materials are key in tool manufacturing, nowadays widely used in cutting, forming and other manufacturing processes. Commonly applied methods for obtaining their strain-rate dependent material properties ... -
Neutral area in terms of risk area principle in transportation law and assessment of COVİD-19 pandemic in regards to neutral area
(Istanbul Univ, Fac Law, 2020)The transport law of Turkish Commercial Code No. 6102 grants certain demand rights to the parties of a carriage contract. This has been attributed to the fact that the transport or delivery obstacle may not fall within the ... -
Silica mesoporous structures: effective nanocarriers in drug delivery and nanocatalysts
(Mdpi, 2020)The application of silica mesoporous structures in drug delivery and the removal of pollutants and organic compounds through catalytic reactions is increasing due to their unique characteristics, including high loading ... -
A modified interval valued intuitionistic fuzzy CODAS method and its application to multi-criteria selection among renewable energy alternatives in Turkey
(Elsevier, 2020)Combinative Distance based ASsesment (CODAS) method aims to perform multi-criteria selection process according to the largest Euclidean and Taxicab distance with respect to negative ideal solutions. Recently, several CODAS ... -
Spreading behavior of droplets impacting over substrates with varying surface topographies
(Elsevier, 2020)Droplet interaction with solid surface plays an important role in a number of practical applications such as thermal management systems, steel production, painting, prevention of impurit deposition, and formation of ... -
Force majeure events affecting the check presentation: evaluation of article 811 TCC using the example of COVID-19 pandemic
(Istanbul Univ, Fac Law, 2020)Force majeure events affecting the presentation of a check are regulated by Article 811 TCC. Force majeure events can generally be defined as events that (temporarily) make it impossible to fulfill any obligations, and ... -
An integrated SMED-fuzzy FMEA model for reducing setup time
(Springer, 2020)Today, the companies apply lean or customized production methods, which enable the production of different kinds of products in small quantities, to meet different customer demands. But, the increase in the product variety ... -
Cooperative quadrature spatial modulation with Euclidean distance and capacity optimized antenna selection
(Wiley, 2021)In this study, new cooperative-quadrature spatial modulation techniques based on Euclidean distance and capacity optimized antenna selection techniques (EDAS-CQSM and COAS-CQSM) are proposed for cooperative communication ... -
Novel strategy for one-step production of attenuated Ag-containing AgCu/ZnO antibacterial-antifungal nanocomposite particles
(Springer, 2020)Novel strategies have been developed to comply with Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) regulations to provide the same performances for antibacterial and antifungal materials. The ... -
Food supply chain in the era of Industry 4.0: blockchain technology implementation opportunities and impediments from the perspective of people, process, performance, and technology
(Taylor & Francis Ltd, 2020)The prevention of food loss throughout the supply chain, including manufacturers, has become a major challenge for a number of organisations. In addition, consumers are also increasingly interested in the authenticity of ... -
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Pergamon-Elsevier Science Ltd, 2020)In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ... -
Electrical layout optimization of onshore wind farms based on a two-stage approach
(Ieee-Inst Electrical Electronics Engineers Inc, 2020)Electrical layouts have a significant impact on the investment cost and electrical losses of wind farms, and therefore, layouts should be optimized for reducing their share in the project budgets. In this study, a two-stage ... -
Optimal number of remanufacturing in a circular economy platform
(Taylor & Francis Ltd, 2020)In reducing waste and protecting natural resources benefits in a circular economy platform, performing remanufacturing tasks are complex, as it may be associated with costs such as investment, setup and disposal cost. Thus, ... -
Inflation volatility and inflation in the wake of the great recession
(Physica-Verlag Gmbh & Co, 2020)A reduced-form investigation reveals that the relationship between the level of inflation and its volatility in the USA may not have been monotonic. This paper quantifies a reversal of the relationship by considering linear ...
