Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 210, listelenen: 51-70
-
Drilling process and resulting surface properties of Inconel 718 alloy fabricated by selective laser melting additive manufacturing
(Elsevier B.V., 2020)One of the challenges is to produce holes with expected dimensional accuracy in metal additive manufacturing. Although post-processing is usually carried out for the additively manufactured components but improving the ... -
The efect of RCA pavements on the liquefaction‑induced settlement
(2023)The use of recycled concrete aggregates (RCA) not only reduces the demand for natural aggregates (NA) but also might improve the behavior of soil under earthquake loading. In this study, the behavior of the pavement ... -
The efect of RCA pavements on the liquefaction‑induced settlement
(Scientific Reports, 2023)The use of recycled concrete aggregates (RCA) not only reduces the demand for natural aggregates (NA) but also might improve the behavior of soil under earthquake loading. In this study, the behavior of the pavement ... -
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
The effect of SSI and impulsive motions on optimum active controlled MDOF structure
(Springer Science and Business Media Deutschland GmbH, 2021)In this study, active controlled ten-story structures including soil-structure interaction (SSI) are investigated under different type of ground motions (near-fault and far ground motions) defined in FEMA P-695 to show the ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials
(Elsevier, 2021)This paper investigates the use of sawdust as fine aggregate and its influence on the properties of hardened concrete, and examines the correlation between sawdust content and hydration days. In this study, untreated wood ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Effects of the cell number and anisotropy in the open cell metal foams on the energy absorption efficiency
(Pamukkale Univ, 2020)By means of cellular structure, open cell metal foams can be used as a light-weight material, and they can absorb impact energy effectively. In this study, effects of cell number and anisotropy in 30 and 45 ppi (pores per ... -
Efficiency of deep neural networks for joint angle modeling in digital gait assessment
(Springer Open, 2021)Reliability and user compliance of the applied sensor system are two key issues of digital healthcare and biomedical informatics. For gait assessment applications, accurate joint angle measurements are important. Inertial ... -
Electrical impedance analysis of carbon nanotube/epoxy nanocomposite-based piezoresistive strain sensors under uniaxial cyclic static tensile loading
(Sage Publications Ltd, 2020)Carbon nanotubes-based nanocomposites have gained a great amount of attraction and play a key role in the realization of strain sensors owing to their remarkable physical properties. In this study, the piezoresistivity of ... -
Electromagnetic investigation of neuron growth by using pulsed electromagnetic field stimulation
(Elsevier, 2023)Electromagnetic field (EMF) applications for humans have been widely used for medical therapy for a long time. Various nerve diseases such as complex regional pain syndrome, cerebral palsy and spinal cord injuries may occur ... -
Estimation of horizontal displacements for geosynthetic reinforced soil wall
(2023)Nowadays, the geotechnical design trend is increasingly heading towards the serviceability limit state. However, the current practice in the design of geosynthetic reinforced soil (GRS) walls mostly relies on ultimate ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
Evaluation of pre‑ and post‑fre food risk by analytical hierarchy process method: a case study for the 2021 wildfres in Bodrum, Turkey
(2023)Wildfres are regarded as one of the devastating natural disturbances to natural ecosystems, and threatening the lives of many species. In July 2021, a wildfre took place in the Mediterranean region of Turkey in multiple ... -
An experimental and analytical study on the influence of superhydrophobic micro-textured surfaces on liquid wetting phenomena
(Elsevier Science Bv, 2018)Controlling dust, particle, gas or liquid attachment or motion over the surfaces is attracting many researchers to reduce losses or reach mission-specific goals. Therefore, researchers have been developing novel surfaces ... -
Experimental and computational investigation of disc brake squeal
(Institute of Noise Control Engineering, 2017)In this paper, the high frequency noise problem brake squeal observed in automotive disc brake systems is experimentally and computationally investigated. Firstly, modal testing on the components of the brake system (brake ... -
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Pergamon-Elsevier Science Ltd, 2020)In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ...