Erişim şekli için "info:eu-repo/semantics/closedAccess" Scopus İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 225, listelenen: 41-60
-
Development of biomimetic hydroxyapatite containing dental restorative composites
(Springer, 2022)The aim of the study was to evaluate the incorporation effect of biomimetic hydroxyapatite (BHA) particles on the mechanical properties of experimental dental composites. Two experimental composites were produced from the ... -
Direct and indirect signal detection of 122 keV photons with a novel detector combining a pnCCD and a CsI(T1) scintillator
(Elsevier, 2016)By combining a low noise fully depleted pnCCD detector with a CsI(TI) scintillator, an energy-dispersive area detector can be realized with a high quantum efficiency (QE) in the range from below 1 keV to above 100 keV. In ... -
Distributed agency: diffusion of responsibility as problematic result of the digitization of social action
(Nomos, 2017)This article addresses the question of whether, in the course of increasing digital action and decision-making programs, the concept of responsibility is still adequate to describe relations between actors, reference objects ... -
Drilling process and resulting surface properties of Inconel 718 alloy fabricated by selective laser melting additive manufacturing
(Elsevier B.V., 2020)One of the challenges is to produce holes with expected dimensional accuracy in metal additive manufacturing. Although post-processing is usually carried out for the additively manufactured components but improving the ... -
Economic analysis of grid-connected residential rooftop PV systems in Turkey
(Pergamon-Elsevier Science Ltd, 2020)This study presents an economic analysis of grid-connected residential rooftop PVs in Turkey under the current feed-in tariff (FiT) scheme. Three solar parts are formed on the solar map of Turkey to discuss the effect of ... -
Economic model for an electric vehicle charging station with vehicle-to-grid functionality
(Wiley, 2020)Energy consumption is increasing in parallel with the population and technological advancements. Albeit the energy efficiency efforts, industrial consumption, and transportation have quite important roles in this increase. ... -
The effect of career planning on work engagement and the mediator role of perceived organizational support
(Peter Lang AG, 2016)[No abstract available] -
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ... -
Effect of filler content on the structure-property poly(ethylene oxide) based polyurethaneurea-silica nanocomposites
(Wiley, 2017)Poly(ethylene oxide) (PEO) based polyurethaneurea‐silica nanocomposites were prepared by solution blending and characterized by Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Differential Scanning ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
Effect of severe plastic deformation on the precipitation kinetics and the properties of CuCoNiBe alloys
(Elsevier, 2022)The effect of the precipitation hardening by means of the conventional heat treatment and the combined thermomechanical treatment (i.e., equal channel angular pressing (ECAP) with subsequent aging) on the electrical ... -
Effect of soft segment molecular weight on tensile properties of poly(propylene oxide) based polyurethaneureas
(Elsevier, 2012)Influence of soft segment molecular weight and hard segment content on the morphology, thermomechanical and tensile properties of homologous polyurethaneurea copolymers based on narrow molecular weight poly(propylene ... -
The effect of SSI and impulsive motions on optimum active controlled MDOF structure
(Springer Science and Business Media Deutschland GmbH, 2021)In this study, active controlled ten-story structures including soil-structure interaction (SSI) are investigated under different type of ground motions (near-fault and far ground motions) defined in FEMA P-695 to show the ... -
Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites
(Wiley, 2019)Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effect of water absorption and hydroxyapatite addition on mechanical and microstructural properties of dental luting cements
(Walter de Gruyter, 2022)In recent years, dental cements have gained more and more importance due to the increasing clinical expectations. They are used as restorative materials and as materials providing critical functions such as chemical and ... -
Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials
(Elsevier, 2021)This paper investigates the use of sawdust as fine aggregate and its influence on the properties of hardened concrete, and examines the correlation between sawdust content and hydration days. In this study, untreated wood ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Electric vehicles and charging infrastructure in Turkey: an overview
(Elsevier, 2021)The depletion of fossil resources, energy dependency, increase in fuel costs and environmental concerns caused by fossil fuel vehicles, along with the advances in battery technology and their manufacturing processes have ... -
Electrical impedance analysis of carbon nanotube/epoxy nanocomposite-based piezoresistive strain sensors under uniaxial cyclic static tensile loading
(Sage Publications Ltd, 2020)Carbon nanotubes-based nanocomposites have gained a great amount of attraction and play a key role in the realization of strain sensors owing to their remarkable physical properties. In this study, the piezoresistivity of ...