Başlık için WoS İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 334, listelenen: 81-100
-
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
Effect of power ultrasound on wettability and collector-less floatability of chalcopyrite, pyrite and quartz
(MDPI-Multidisciplinary Digital Publishing Institute, 2021)Numerous studies have addressed the role of ultrasonication on floatability of minerals macroscopically. However, the impact of acoustic waves on the mineral hydrophobicity and its physicochemical aspects were entirely ... -
The effect of preceramic soldering on fracture resistance of 4-unit zirconia fixed dental prostheses
(Wiley, 2022)Purpose Preceramic soldering of zirconia may deliver better fitting restorations. However, there is not sufficient evidence regarding the influence of preceramic soldering of zirconia restorations on mechanical strength. ... -
Effect of severe plastic deformation on the precipitation kinetics and the properties of CuCoNiBe alloys
(Elsevier, 2022)The effect of the precipitation hardening by means of the conventional heat treatment and the combined thermomechanical treatment (i.e., equal channel angular pressing (ECAP) with subsequent aging) on the electrical ... -
Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites
(Wiley, 2019)Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effect of water absorption and hydroxyapatite addition on mechanical and microstructural properties of dental luting cements
(Walter de Gruyter, 2022)In recent years, dental cements have gained more and more importance due to the increasing clinical expectations. They are used as restorative materials and as materials providing critical functions such as chemical and ... -
Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials
(Elsevier, 2021)This paper investigates the use of sawdust as fine aggregate and its influence on the properties of hardened concrete, and examines the correlation between sawdust content and hydration days. In this study, untreated wood ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Effects of the cell number and anisotropy in the open cell metal foams on the energy absorption efficiency
(Pamukkale Univ, 2020)By means of cellular structure, open cell metal foams can be used as a light-weight material, and they can absorb impact energy effectively. In this study, effects of cell number and anisotropy in 30 and 45 ppi (pores per ... -
Effects of ultrasound on desliming prior to feldspar flotation
(Mdpi, 2019)In this study, the effects of ultrasound on removal of impurities from raw feldspar were investigated by testing with a newly developed flotation cell with various frequency and power intensities prior to multistage feldspar ... -
Efficiency of deep neural networks for joint angle modeling in digital gait assessment
(Springer Open, 2021)Reliability and user compliance of the applied sensor system are two key issues of digital healthcare and biomedical informatics. For gait assessment applications, accurate joint angle measurements are important. Inertial ... -
Electric vehicles and charging infrastructure in Turkey: an overview
(Elsevier, 2021)The depletion of fossil resources, energy dependency, increase in fuel costs and environmental concerns caused by fossil fuel vehicles, along with the advances in battery technology and their manufacturing processes have ... -
Electrical impedance analysis of carbon nanotube/epoxy nanocomposite-based piezoresistive strain sensors under uniaxial cyclic static tensile loading
(Sage Publications Ltd, 2020)Carbon nanotubes-based nanocomposites have gained a great amount of attraction and play a key role in the realization of strain sensors owing to their remarkable physical properties. In this study, the piezoresistivity of ... -
Electrical layout optimization of onshore wind farms based on a two-stage approach
(Ieee-Inst Electrical Electronics Engineers Inc, 2020)Electrical layouts have a significant impact on the investment cost and electrical losses of wind farms, and therefore, layouts should be optimized for reducing their share in the project budgets. In this study, a two-stage ... -
Electrochemical MIP sensor for butyrylcholinesterase
(Mdpi, 2019)Molecularly imprinted polymers (MIPs) mimic the binding sites of antibodies by substituting the amino acid-scaffold of proteins by synthetic polymers. In this work, the first MIP for the recognition of the diagnostically ... -
Electrochemical MIP-sensors for drugs
(Bentham Science Publ Ltd, 2018)In order to replace bio-macromolecules by stable synthetic materials in separation techniques and bioanalysis biomimetic receptors and catalysts have been developed: Functional monomers are polymerized together with the ... -
Electrosynthesized MIPs for transferrin: Plastibodies or nano-filters?
(Elsevier Advanced Technology, 2018)Molecularly imprinted polymer (MP) nanofilrns for transferrin (Trf) have been synthesized on gold surfaces by electro-polymerizing the functional monomer scopoletin in the presence of the protein target or around pre-adsorbed ... -
Electrosynthesized molecularly imprinted polymer for laccase using the inactivated enzyme as the target
(Wiley-V C H Verlag Gmbh, 2018)The first molecularly imprinted polymer (MIP) for the recognition of the copper-enzyme laccase was successfully prepared by electropolymerizing scopoletin in the presence of alkaline-inactivated enzyme. Laccase-MIP and the ... -
Enantioselective synthesis of 2,3-dihydrofurans using a bifunctional quinine/squaramide organocatalyst
(Royal Society of Chemistry, 2022)Asymmetric organocatalytic domino type Michael-S(N)2 reactions give access to enantiomerically enriched dihydrofuran derivatives that can be used as valuable chiral building blocks. A variety of alpha-bromonitroalkenes and ...
