Ara
Toplam kayıt 22, listelenen: 11-20
Applications of a pnCCD detector coupled to columnar structure CsI(Tl) scintillator system in ultra high energy X-ray Laue diffraction
(Iop Publishing Ltd, 2017)
Most charge coupled devices (CCDs) are made of silicon (Si) with typical active layer thicknesses of several microns. In case of a pnCCD detector the sensitive Si thickness is 450 mu m. However, for silicon based detectors ...
Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing
(Springer London Ltd, 2020)
A metal component fabricated by additive manufacturing (AM) is generally required to be heat treated to enhance microstructural and mechanical aspects. This present study aims to contribute to the literature in understanding ...
Cooperative quadrature spatial modulation with Euclidean distance and capacity optimized antenna selection
(Wiley, 2021)
In this study, new cooperative-quadrature spatial modulation techniques based on Euclidean distance and capacity optimized antenna selection techniques (EDAS-CQSM and COAS-CQSM) are proposed for cooperative communication ...
Foams of gray cast iron as efficient energy absorption structures: a feasibility study
(Wiley-V C H Verlag Gmbh, 2019)
Gray cast iron foams, were produced using a reticulated polyurethane by using a modified investment casting process. To evaluate the attributes of the produced micro-geometries, foam segments and single struts are investigated ...
In situ shear behavior of open-cell austenitic 316L steel foams
(Elsevier Science Sa, 2020)
Foam cores in crash boxes are subjected to large shear forces during crash situations. Here, the failure behavior of 316L open-cell stainless steel foams under shearing conditions was investigated. A custom-made grip system ...
Effects of the cell number and anisotropy in the open cell metal foams on the energy absorption efficiency
(Pamukkale Univ, 2020)
By means of cellular structure, open cell metal foams can be used as a light-weight material, and they can absorb impact energy effectively. In this study, effects of cell number and anisotropy in 30 and 45 ppi (pores per ...
Micro and nano damage observations of martensitic and austenitic open cell cast foams
(Elsevier Science, 2022)
In current study a detailed investigation of the 304 austenitic and 420 martensitic foams damage has been carried out at all hierarchical levels. In-situ compression testing of foams and microtensile testing of single ...
Strain hardening reduces energy absorption efficiency of austenitic stainless steel foams while porosity does not
(Elsevier Sci Ltd, 2018)
Strain hardening significantly affects the mechanical function of steel foams. We compare hardening and failure of two commercially available austenitic stainless steel foams (316L and 310) spanning strut porosities of 9.4 ...
Experimental study of the impact of electrospinning parameters on the electromechanical properties of strain sensitive electrospun multiwalled carbon nanotubes/ thermoplastic polyurethane nanofibers
(Taylor & Francis, 2021)
Flexible strain sensitive electrospun fibrous layers have attracted widespread attention of researchers owing to their large surface area and exceptional flexibility. Herein, a detailed research on the impact of electrospinning ...
Differential chaos shift keying assisted media-based modulation
(İstanbul Üniversitesi, 2021)
This study proposes a new energy-efficient and high data-rated communication technique by combining media-based modulation (MBM) and differential chaos shift keying technique (DCSK), called DCSK–MBM. The MBM technique, ...