Basit öğe kaydını göster

dc.contributor.authorİncekar, Erkan
dc.contributor.authorKaygısz, Hüseyin
dc.contributor.authorBabur, Sebahattin
dc.date.accessioned2021-12-24T08:39:06Z
dc.date.available2021-12-24T08:39:06Z
dc.date.issued2021en_US
dc.identifier.citationİncekar E., Kaygısız H. ve Babur S., “Dimensional accuracy analysis of samples printed in delta and cartesian kinematic three dimensional printers”, Politeknik Dergisi, 24(2): 529-537, (2021).en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.urihttps://hdl.handle.net/20.500.12846/610
dc.description.abstractThe motion mechanisms of manufacturing and robotic systems are developed in different structures, mainly in cartesian and delta structures having series or parallel movement abilities according to the capacity and construction structure of the system. Different systems are used according to the criteria such as bearing load capacity, sensitivity or cost of the system. In this study, the performances of machines installed in the delta and cartesian kinematic structures, which are mostly used in the kinematic systems of three - dimensional printers, were analyzed. In this context, in two different machines with these two construction structures, the same boundary conditions and 4 pieces of calibration parts especially in manufacturing features were printed. 23 different elements that constituted the calibration part were measured, tabulated, statistically analyzed, and the acceptable measuremental tolerance ranges of the elements were determined and the accuracy values of the machines were compared. As a result of this study, according to T test results, 15 of the 23 measurements on the Cartesian system based three-dimensional printers were obtained as acceptable in terms of tolerance range as well as 9 of the 23 different measurements were obtained as acceptable on Delta system. Consequently, operation accuracy of the Cartesian system based three-dimensional printers were higher than the Delta system under the same working conditions and manufacturing parameters.en_US
dc.language.isoengen_US
dc.publisherGazi Üniversitesien_US
dc.relation.isversionof10.2339/politeknik.582410en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAccuracy Measurementen_US
dc.subjectDelta Printeren_US
dc.subjectCartesian Printeren_US
dc.subjectGenauigkeitsmessungen_US
dc.subjectKartesischer Druckeren_US
dc.subjectDelta Druckeren_US
dc.subjectDoğruluk Ölçümüen_US
dc.subjectDelta Yazıcıen_US
dc.subjectKartezyen Yazıcıen_US
dc.titleDimensional accuracy analysis of samples printed in delta and cartesian kinematic three dimensional printersen_US
dc.title.alternativeDelta ve kartezyen kinematik yapılı üç boyutlu yazıcılarda basılan numunelerin boyutsal doğruluk analizien_US
dc.typearticleen_US
dc.relation.journalPoliteknik Dergisien_US
dc.contributor.authorID0000-0002-2982-8405en_US
dc.identifier.volume24en_US
dc.identifier.issue2en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.departmentTAÜen_US
dc.contributor.institutionauthorBabur, Sebahattin
dc.identifier.startpage529en_US
dc.identifier.endpage537en_US
dc.identifier.wosqualityN/Aen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster