Ara
Toplam kayıt 29, listelenen: 21-29
Gas-driven thin liquid films: effect of interfacial shear on the film waviness and convective heat transfer
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2019)
This study is aimed at experimental investigation of hydrodynamics and convective heat transfer in gravity and gas-driven thin liquid wall films. The liquid film has been annularly applied on a vertically aligned heated ...
Calibration-free extraction of constitutive parameters of magnetically coupled anisotropic metamaterials using waveguide measurements
(Amer Inst Physics, 2017)
A calibration-free method for extraction of electromagnetic properties of magnetically coupled anisotropic biaxial metamaterial (MM) slabs from waveguide measurements is proposed. It relies on three measurement steps (thru, ...
Cooling performance prediction of a metal foam internal heat exchanger: An artificial neural network approach
(2023)
Although HFC refrigerants have high global warming potential (GWP) values, they are preferred due to their satisfactory cooling performance and A1 fire protection classification. If possible, alternatives of HFC-type ...
Stress, strain and strain-rate cemented carbide properties determined with a fem-supported evaluation of impact test imprints
(Elsevier Sci Ltd, 2021)
Cemented carbide materials are key in tool manufacturing, nowadays widely used in cutting, forming and other manufacturing processes. Commonly applied methods for obtaining their strain-rate dependent material properties ...
Stiffening of biopolymer aerogel networks upon wetting: a model-based study
(Elsevier, 2020)
The mechanism behind the stiffening effect observed in the stress-strain response of alginate-starch aerogels upon being exposed to wetting is investigated in this paper, via a physically motivated model approach. A network ...
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)
Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ...
Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach
(Wiley, 2018)
Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non-toxic, co-solvent ES was performed to obtain core-shell ...
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)
Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ...
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)
Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ...