Ara
Toplam kayıt 26, listelenen: 1-10
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Pergamon-Elsevier Science Ltd, 2020)
In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ...
Rapid heating and cooling chamber for a photonics junction measurement system
(IEEE Computer Society, 2020)
Since many industrial applications require heat treatment processes or validation tests under certain ambient temperatures, thermal design is a key issue to be considered in order to ensure fast heating and cooling ...
Impact of functional nanofluid coolant on radiator performance
(Asme, 2019)
While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ...
Preparation and characterization of porous hydroxyapatite pellets: effects of calcination and sintering on the porous structure and mechanical properties
(Sage Publications Ltd, 2016)
In this study, porous hydroxyapatite structures were produced by using urea particles of 600-850 mu m size. Samples with two different urea composition (25 and 50 wt%) were prepared along with samples without any urea ...
Numerical and experimental analysis of a heat-pipe-embedded printed circuit board for solid state lighting applications
(Taylor & Francis Inc, 2019)
Thermal management is one of the main issues for electronics cooling especially for tightly packaged PCBs that experience local heat generation. Thus, theoretical and experimental investigations have been conducted to ...
Spreading behavior of droplets impacting over substrates with varying surface topographies
(Elsevier, 2020)
Droplet interaction with solid surface plays an important role in a number of practical applications such as thermal management systems, steel production, painting, prevention of impurit deposition, and formation of ...
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)
Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ...
A constitutive model for hysteresis: the continuum damage approach for filled rubber-like materials
(Springer, 2020)
In this contribution, a constitutive model is proposed for filled rubber-like materials to describe hysteresis. The model is based on the network decomposition concept. Rubber matrix is decomposed into purely elastic and ...
Cutting performance improvement of MTCVD coated cemented carbide inserts via appropriate heat treatment
(Elsevier, 2020)
The softening of cemented carbide at the elevated temperature of MTCVD processes results in significant reduction of their strength, and thus, high coating deformation during cutting. In this way, at interrupted cutting ...
Comparison of deep drawability of AA5754-H22 and AA6061-T6 aluminum alloys for automotive applications
(Carl Hanser Verlag, 2017)
Being one of the most commonly applied sheet metal forming processes in automotive industry, deep drawing technologies are challenged by the concerns of global warming for higher fuel economy requirements in the recent ...