WoS Q Kategorisi "Q3" Makine Mühendisliği Bölümü Koleksiyonu İçin Listeleme
Toplam kayıt 7, listelenen: 1-7
-
Calibration-free extraction of constitutive parameters of magnetically coupled anisotropic metamaterials using waveguide measurements
(Amer Inst Physics, 2017)A calibration-free method for extraction of electromagnetic properties of magnetically coupled anisotropic biaxial metamaterial (MM) slabs from waveguide measurements is proposed. It relies on three measurement steps (thru, ... -
A constitutive model for hysteresis: the continuum damage approach for filled rubber-like materials
(Springer, 2020)In this contribution, a constitutive model is proposed for filled rubber-like materials to describe hysteresis. The model is based on the network decomposition concept. Rubber matrix is decomposed into purely elastic and ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
A hyperelastic constitutive model for rubber-like materials
(Springer, 2020)Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain ... -
Impact of functional nanofluid coolant on radiator performance
(Asme, 2019)While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ... -
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ... -
Preparation and characterization of porous hydroxyapatite pellets: effects of calcination and sintering on the porous structure and mechanical properties
(Sage Publications Ltd, 2016)In this study, porous hydroxyapatite structures were produced by using urea particles of 600-850 mu m size. Samples with two different urea composition (25 and 50 wt%) were prepared along with samples without any urea ...