Scopus Q Kategorisi "Q2" Makine Mühendisliği Bölümü Koleksiyonu İçin Listeleme
Toplam kayıt 13, listelenen: 1-13
-
Calibration-free extraction of constitutive parameters of magnetically coupled anisotropic metamaterials using waveguide measurements
(Amer Inst Physics, 2017)A calibration-free method for extraction of electromagnetic properties of magnetically coupled anisotropic biaxial metamaterial (MM) slabs from waveguide measurements is proposed. It relies on three measurement steps (thru, ... -
Characterization of stress softening and self-healing in a double network hydrogel
(Elsevier, 2019)In this paper, a micro-mechanically based constitutive model is presented to describe stress softening and self-healing in alginate-polyacrylamide (PAAm) double network (DN) hydrogels. The stress softening phenomenon in ... -
Comparison of deep drawability of AA5754-H22 and AA6061-T6 aluminum alloys for automotive applications
(Carl Hanser Verlag, 2017)Being one of the most commonly applied sheet metal forming processes in automotive industry, deep drawing technologies are challenged by the concerns of global warming for higher fuel economy requirements in the recent ... -
A constitutive model for hysteresis: the continuum damage approach for filled rubber-like materials
(Springer, 2020)In this contribution, a constitutive model is proposed for filled rubber-like materials to describe hysteresis. The model is based on the network decomposition concept. Rubber matrix is decomposed into purely elastic and ... -
Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach
(Wiley, 2018)Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non-toxic, co-solvent ES was performed to obtain core-shell ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
A hyperelastic constitutive model for rubber-like materials
(Springer, 2020)Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain ... -
Impact of functional nanofluid coolant on radiator performance
(Asme, 2019)While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ... -
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ... -
Preparation and characterization of porous hydroxyapatite pellets: effects of calcination and sintering on the porous structure and mechanical properties
(Sage Publications Ltd, 2016)In this study, porous hydroxyapatite structures were produced by using urea particles of 600-850 mu m size. Samples with two different urea composition (25 and 50 wt%) were prepared along with samples without any urea ... -
Stiffening of biopolymer aerogel networks upon wetting: a model-based study
(Elsevier, 2020)The mechanism behind the stiffening effect observed in the stress-strain response of alginate-starch aerogels upon being exposed to wetting is investigated in this paper, via a physically motivated model approach. A network ...