Erişim şekli için "info:eu-repo/semantics/closedAccess" Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 26, listelenen: 1-20
-
Calibration-free extraction of constitutive parameters of magnetically coupled anisotropic metamaterials using waveguide measurements
(Amer Inst Physics, 2017)A calibration-free method for extraction of electromagnetic properties of magnetically coupled anisotropic biaxial metamaterial (MM) slabs from waveguide measurements is proposed. It relies on three measurement steps (thru, ... -
Comparison of deep drawability of AA5754-H22 and AA6061-T6 aluminum alloys for automotive applications
(Carl Hanser Verlag, 2017)Being one of the most commonly applied sheet metal forming processes in automotive industry, deep drawing technologies are challenged by the concerns of global warming for higher fuel economy requirements in the recent ... -
A constitutive model for hysteresis: the continuum damage approach for filled rubber-like materials
(Springer, 2020)In this contribution, a constitutive model is proposed for filled rubber-like materials to describe hysteresis. The model is based on the network decomposition concept. Rubber matrix is decomposed into purely elastic and ... -
Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach
(Wiley, 2018)Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non-toxic, co-solvent ES was performed to obtain core-shell ... -
Cutting performance improvement of MTCVD coated cemented carbide inserts via appropriate heat treatment
(Elsevier, 2020)The softening of cemented carbide at the elevated temperature of MTCVD processes results in significant reduction of their strength, and thus, high coating deformation during cutting. In this way, at interrupted cutting ... -
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
An experimental and analytical study on the influence of superhydrophobic micro-textured surfaces on liquid wetting phenomena
(Elsevier Science Bv, 2018)Controlling dust, particle, gas or liquid attachment or motion over the surfaces is attracting many researchers to reduce losses or reach mission-specific goals. Therefore, researchers have been developing novel surfaces ... -
Experimental and computational investigation of disc brake squeal
(Institute of Noise Control Engineering, 2017)In this paper, the high frequency noise problem brake squeal observed in automotive disc brake systems is experimentally and computationally investigated. Firstly, modal testing on the components of the brake system (brake ... -
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Pergamon-Elsevier Science Ltd, 2020)In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ... -
An experimental investigation into frost accumulation over vertical finned and unfinned surfaces during impinging air flow
(American Society of Mechanical Engineers, 2020)Frost formation on evaporators negatively affects the cooling performance of refrigerators. It increases the thermal resistance between the refrigerant and air leading to a reduction in the system cooling capacity. In this ... -
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier Ltd, 2021)In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ... -
Gas-driven thin liquid films: effect of interfacial shear on the film waviness and convective heat transfer
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2019)This study is aimed at experimental investigation of hydrodynamics and convective heat transfer in gravity and gas-driven thin liquid wall films. The liquid film has been annularly applied on a vertically aligned heated ... -
A hyperelastic constitutive model for rubber-like materials
(Springer, 2020)Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain ... -
Impact of functional nanofluid coolant on radiator performance
(Asme, 2019)While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ... -
Investigation of flow patterns and heat transfer in gas-driven thin liquid films
(International Symposium on Turbulence and Shear Flow Phenomena, TSFP, 2019)Gas-driven liquid films are a promising candidate for heat up and evaporation of liquids in an efficient way. Many industrial fields benefit of this type of treatment, because of an intensive heat transfer, such as upcoming ... -
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ...