Basit öğe kaydını göster

dc.contributor.authorOğuz, Oğuzhan
dc.contributor.authorCandau, Nicolas
dc.contributor.authorBernhard, Stephane H. F.
dc.contributor.authorSöz, Çağla
dc.contributor.authorHeinz, Özge
dc.contributor.authorStochlet, Gregory
dc.contributor.authorMenceloğlu, Yusuf Z.
dc.date.accessioned2021-01-08T21:51:22Z
dc.date.available2021-01-08T21:51:22Z
dc.date.issued2019
dc.identifier.issn0887-624X
dc.identifier.issn1099-0518
dc.identifier.urihttp://doi.org/10.1002/pola.29529
dc.identifier.urihttps://hdl.handle.net/20.500.12846/180
dc.descriptioncandau, nicolas/0000-0002-1559-8696; Oguz, Oguzhan/0000-0002-4457-5274en_US
dc.descriptionWOS:000496886100001en_US
dc.description.abstractColloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investigate the effect of their surface chemistry on the structure-property behavior of the resulting nanocomposites. The rigid amorphous fraction (RAF) of the nanocomposite matrix as determined by differential scanning calorimetry and dynamic mechanical analysis was confirmed to vary significantly with the surface chemistry of the NPs and to be strongly correlated with the bulk mechanical properties in simple tension. Hence, nanocomposites with an RAF of about 30 wt % showed a 120% increase in Young's modulus, a 25% increase in tensile strength, a 15% decrease in elongation at break with respect to the neat matrix, which had no detectable RAF, whereas nanocomposites with an RAF of less than 5% showed a 60% increase in Young's modulus, a 10% increase in tensile strength and a 5% decrease in the elongation at break. (c) 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019en_US
dc.description.sponsorshipScientific and Technical Research Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [109M073]en_US
dc.description.sponsorshipSome preliminary investigations for this study were performed as part of a project funded by the Scientific and Technical Research Council of Turkey (TUBITAK) with the contract number 109M073.en_US
dc.language.isoengen_US
dc.publisherWileyen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectElastomersen_US
dc.subjectPolyurethanesen_US
dc.subjectSilicasen_US
dc.subjectModificationen_US
dc.subjectNanocompositesen_US
dc.subjectThermal Propertiesen_US
dc.subjectMechanical Propertiesen_US
dc.subjectDynamic Mechanical Propertiesen_US
dc.subjectSurface Modificationen_US
dc.titleEffect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocompositesen_US
dc.typearticleen_US
dc.relation.journalJournal Of Polymer Science Part A-Polymer Chemistryen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.departmentTAÜ, Fen Fakültesi, Malzeme Bilimi ve Teknolojileri Bölümüen_US
dc.contributor.institutionauthorSöz, Çağla
dc.identifier.doi10.1002/pola.29529
dc.identifier.wosqualityQ2en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.wosWOS:000496886100001en_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster