Ara
Toplam kayıt 7, listelenen: 1-7
Preparation and characterization of porous hydroxyapatite pellets: effects of calcination and sintering on the porous structure and mechanical properties
(Sage Publications Ltd, 2016)
In this study, porous hydroxyapatite structures were produced by using urea particles of 600-850 mu m size. Samples with two different urea composition (25 and 50 wt%) were prepared along with samples without any urea ...
Comparison of deep drawability of AA5754-H22 and AA6061-T6 aluminum alloys for automotive applications
(Carl Hanser Verlag, 2017)
Being one of the most commonly applied sheet metal forming processes in automotive industry, deep drawing technologies are challenged by the concerns of global warming for higher fuel economy requirements in the recent ...
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)
In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ...
Strain hardening reduces energy absorption efficiency of austenitic stainless steel foams while porosity does not
(Elsevier Sci Ltd, 2018)
Strain hardening significantly affects the mechanical function of steel foams. We compare hardening and failure of two commercially available austenitic stainless steel foams (316L and 310) spanning strut porosities of 9.4 ...
Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach
(Wiley, 2018)
Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non-toxic, co-solvent ES was performed to obtain core-shell ...
Experimental and computational investigation of disc brake squeal
(Institute of Noise Control Engineering, 2017)
In this paper, the high frequency noise problem brake squeal observed in automotive disc brake systems is experimentally and computationally investigated. Firstly, modal testing on the components of the brake system (brake ...
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)
Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ...