Ara
Toplam kayıt 21, listelenen: 11-20
Koronavirüsü nasıl bilirsiniz? Kimlik inşası, ötekileştirme ve küreseli yeniden düşünmek
(UIKPanorama, 2020)
Üniversitelerin ‘Uluslararası İlişkiler’ ile ‘Siyaset Bilimi ve Uluslararası İlişkiler’ bölümlerinde verilen ‘Uluslararası İlişkiler’e Giriş’ derslerinde günümüzde en çok vurgulanan cümlelerden biri küresel politikanın ...
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)
Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ...
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)
Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ...
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)
Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ...
An experimental investigation into frost accumulation over vertical finned and unfinned surfaces during impinging air flow
(American Society of Mechanical Engineers, 2020)
Frost formation on evaporators negatively affects the cooling performance of refrigerators. It increases the thermal resistance between the refrigerant and air leading to a reduction in the system cooling capacity. In this ...
Effect of conventional and microwave thermal treatments on floatability of low- and high-rank lignites
(Energy Sources Part A-Recovery Utilization and Environmental Effects, 2020)
Thermal treatment is one of the well-known methods used before froth flotation to remove the polar groups from coal surfaces to make them more hydrophobic. In this study, the effect of conventional and microwave thermal ...
Direct validation of model-predicted muscle forces in the cat hindlimb during locomotion
(Journal of Biomechanical engineering-transactions of the asme, 2020)
Various methods are available for simulating the movement patterns of musculoskeletal systems and determining individual muscle forces, but the results obtained from these methods have not been rigorously validated against ...
Biomechanical comparison of implantation approaches for the treatment of mandibular total edentulism
(Proceedings of the institution of mechanical engineers part h-journal of engineering in medicine, 2020)
Applying four anterior implants placed vertically or tilted in the mandible is considered to provide clinically reasonable results in the treatment of mandibular posterior edentulism. It is also reported that a combination ...
A genetic algorithm based multi-objective optimization of squealer tip geometry in axial flow turbines: A constant tip gap approach
(2020)
Tip clearance is a crucial aspect of turbomachines in terms of aerodynamic and thermal performance. A gap between the blade tip surface and the stationary casing must be maintained to allow the relative motion of the blade. ...