Başlık için Malzeme Bilimi ve Teknolojileri listeleme
Toplam kayıt 71, listelenen: 29-48
-
Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis
(Taylor & Francis, 2022)Efficient recovery of rare earth elements (REEs) from scrap NdFeB magnets is a significant requirement for a circular economy. Therefore, the development of a cost-effective and environmentally friendly leaching process ... -
In-situ photochemical synthesis and dielectric properties of nanocomposite thin films containing Au, Ag and MnO nanoparticles
(Elsevier, 2021)Thioxanthone-Anthracene (TX-A) was used as a one-component Type II photoinitiator for the photopolymerization of PEGMEA/PEGDA monomer mixture consisting of AgNO3, HAuCl4 and MnCl2 metallic salts. In this study, we have ... -
Influence of coating method on the formation of superhydrophobic silicone-urea surfaces modified with fumed silica nanoparticles
(2015)Effect of the coating method on the formation of superhydrophobic polydimethylsiloxane-urea (TPSC) copolymer surfaces, modified by the incorporation of hydrophobic fumed silica nanoparticles were investigated. Four different ... -
Influence of different irrigation solutions on the push-out bond strength of fiber posts to root dentin and root canal dentin microhardness: methodological study
(Türkiye Klinikleri Diş Hekimliği Bilimleri Dergisi, 2023)This study aimed to compare the effect of sodium hypochlorite (NaOCl), chlorhexidine (CHX), ethylene diamine tetra acetic acid (EDTA) and etidronic acid (HEBP) solutions and their combinations on a push-out bond strength ... -
Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through layer-by-layer spin-coating with hydrophobic fumed silica
(Elsevier, 2015)Formation of superhydrophobic polymer surfaces were investigated through successive spin-coating of hydrophobic fumed silica dispersed in an organic solvent onto polymer films. Two different polymers, a hydrophobic segmented ... -
Influence of the coating method on the formation of superhydrophobic silicone–urea surfaces modified with fumed silica nanoparticles
(Elsevier, 2015)Effect of the coating method on the formation of superhydrophobic polydimethylsiloxane–urea copolymer (TPSC) surfaces, modified by the incorporation of hydrophobic fumed silica nanoparticles was investigated. Four different ... -
Investigation of Cu whisker growth by molecular beam epitaxy
(Walter de Gruyter, 2021)There is a trend towards smaller and smaller structures (nanostructures/miniaturization) which is well known in microelectronic, energy and semiconductor applications. Nanoengineering is expected to lead to significant ... -
Investigation of the effect of light fastness on the color changes of maps prepared by electrophotographic digital printing
(Walter de Gruyter, 2022)In this study the prints were made on paper substrates, which were thought as map substrate alternatives, with 3 different surface properties at 1200 dpi by using the electrophotographic printing system. Color and gloss ... -
In–situ formation of self-assembled Ag nanoclusters on ct-DNA in the presence of 2-mercaptothioxanthone by using UV–vis light irradiation
(Elsevier, 2018)Self-assembled silver nanoparticles (Ag NPs) on calf thymus DNA (ct-DNA) chains were synthesized in the presence of 2-mercaptothioxanthone (TX-SH) by use of UV irradiation technique. Thioxanthone itself and its derivatives ... -
Janus interface materials: a critical review and comparative study
(Amer Chemical Soc, 2020)In recent years, Janus interface materials with wettability contrast have attracted remarkable attention because of their beneficial properties and versatile potential applications in materials science including transport, ... -
Mechanical and wetting properties of coated paper sheets with varying polydimethylsiloxane molecular masses in the coating formulation
(Scientific & Technical Research Council Turkey-TUBITAK, 2022)Coated paper sheets were prepared by immobilizing a thin coating layer of cross-linked polydimethylsiloxane (PDMS) and inorganic particles onto Whatman filter paper Grade 1 (WFP) substrates. Several coatings that differed ... -
Modifying ultrafast optical response of sputtered VOX nanostructures in a broad spectral range by altering post annealing atmosphere
(Iop Publishing Ltd, 2015)Nanostructured VOX thin films were grown in a dc magnetron sputter system under two different Ar:O-2 gas flow ratios. The films were annealed under vacuum and various ratios of O-2/N-2 atmospheres. The insulator-to-metal ... -
Morphological, microstructural and photocatalytic characterization of undoped and Ni, Co doped Fe2O3 particles synthesized by sonochemical method
(Scientific & Technical Research Council Turkey-TUBITAK, 2022)In this study, an abundant and eco-friendly photocatalytic material, Fe2O3 particles were synthesized by sonochemical method. Morphological and microstructural investigations of synthesized undoped and Ni, Co-doped Fe2O3 ... -
Multifunctional alginate-based hydrogel with reversible crosslinking for controlled therapeutics delivery
(Elsevier, 2020)Glycan-based alginate hydrogels have great potential in creating new vehicles with responsive behavior and tunable properties for biomedicine. However, precise control and tunability in properties present major barrier for ... -
Nanoflower hydroxyapatite's effect on the properties of resin-based dental composite
(Journal of Applied Polymer Science, 2024)To investigate the reinforcing effect of nanoflower-like hydroxyapatite (NFHA) inresin-based dental composites, we synthesized a novel NFHA using microwaveirradiation (MW), hydrothermal treatment (HT), and sonochemical ... -
NdFeB Magnets recycling process: an alternative method to produce mixed rare earth oxide from Scrap NdFeB Magnets
(MDPI, 2021)Neodymium iron boron magnets (NdFeB) play a critical role in various technological applications due to their outstanding magnetic properties, such as high maximum energy product, high remanence and high coercivity. Production ... -
New proposal for size and size-distribution evaluation of nanoparticles synthesized via ultrasonic spray pyrolysis using search algorithm based on image-processing technique
(Mdpi, 2020)Nanoparticle properties are correlated to their size, size distribution, and shape; it is essential to accurately measure these features in the field of nanoscience. In this study, silver nanoparticles (AgNPs) were synthesized ... -
Novel strategy for one-step production of attenuated Ag-containing AgCu/ZnO antibacterial-antifungal nanocomposite particles
(Springer, 2020)Novel strategies have been developed to comply with Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) regulations to provide the same performances for antibacterial and antifungal materials. The ... -
Numerical and experimental formability analysis of aluminum 3105 sandwich panels produced by continuous hot-press forming
(Walter de Gruyter, 2022)Aluminum-plastic composites as building materials are widely used for different construction purposes, for instance, for exterior wall cladding, ventilated facades, and interior decoration of buildings, in billboards, ... -
Optimization of catalyst preparation conditions for hydrogen generation in the presence of Co–B using taguchi method
(Elsevier Ltd, 2021)Efficient hydrogen generation is a significant prerequisite of future hydrogen economy. Therefore, the development of efficient non-noble metal catalysts for hydrolysis reaction of sodium borohydride (NaBH4) under mild ...
