Ara
Toplam kayıt 16, listelenen: 1-10
Generalized code index modulation and spatial modulation for high rate and energy-efficient MIMO systems on rayleigh block-fading channel
(IEEE, 2021)
In this article, a high data rate and energy-efficient multiple-input multiple-output transmission scheme is considered by combining two popular and rational modulation techniques: spatial modulation (SM) and code index ...
A new spectroscopic imager for X-rays from 0.5 keV to 150 keV combining a pnCCD and a columnar CsI(Tl) scintillator
(Iop Publishing Ltd, 2017)
By combining a low noise fully depleted pnCCD detector with a columnar CsI(Tl) scintillator an energy dispersive spatial resolving detector can be realized with a high quantum efficiency in the range from below 0.5 keV to ...
Direct and indirect signal detection of 122 keV photons with a novel detector combining a pnCCD and a CsI(T1) scintillator
(Elsevier, 2016)
By combining a low noise fully depleted pnCCD detector with a CsI(TI) scintillator, an energy-dispersive area detector can be realized with a high quantum efficiency (QE) in the range from below 1 keV to above 100 keV. In ...
Investigation of temperature effect on the electrical properties of MWCNTs/epoxy nanocomposites by electrochemical impedance spectroscopy
(Taylor & Francis Ltd, 2020)
This study investigates the impact of the temperature exposure on the electrical properties of the multi-walled carbon nanotubes (MWCNTs)/epoxy based nanocomposites for the temperature range from 20 degrees C to 80 degrees ...
Code-index modulation aided quadrature spatial modulation for high-rate MIMO systems
(Ieee-Inst Electrical Electronics Engineers Inc, 2019)
In this correspondence paper, a novel code-index modulation (CIM) aided quadrature spatial modulation (QSM) scheme, called CIM-QSM, is proposed for highly spectrum and energy efficient multiple-input multiple-output (MIMO) ...
Single steel strut mechanical testing: challenges and future research directions
(Taylor & Francis Ltd, 2019)
Open-cell stainless steel foams, composed of hollow struts, are excellent candidates for energy absorption and thermo-mechanical applications. The basic mechanical element responsible for the function of these foams is the ...
Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing
(Springer London Ltd, 2020)
A metal component fabricated by additive manufacturing (AM) is generally required to be heat treated to enhance microstructural and mechanical aspects. This present study aims to contribute to the literature in understanding ...
Cooperative quadrature spatial modulation with Euclidean distance and capacity optimized antenna selection
(Wiley, 2021)
In this study, new cooperative-quadrature spatial modulation techniques based on Euclidean distance and capacity optimized antenna selection techniques (EDAS-CQSM and COAS-CQSM) are proposed for cooperative communication ...
Foams of gray cast iron as efficient energy absorption structures: a feasibility study
(Wiley-V C H Verlag Gmbh, 2019)
Gray cast iron foams, were produced using a reticulated polyurethane by using a modified investment casting process. To evaluate the attributes of the produced micro-geometries, foam segments and single struts are investigated ...
Design criteria for a high energy Compton Camera and possible application to targeted cancer therapy
(Iop Publishing Ltd, 2015)
The proposed research focuses on the design criteria for a Compton Camera with high spatial resolution and sensitivity, operating at high gamma energies and its possible application for molecular imaging. This application ...