Ara
Toplam kayıt 17, listelenen: 11-17
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier Ltd, 2021)
In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ...
Investigation of the effects of additives on the electrical and magnetic properties of polyester resin
(Istanbul University Cerrahpaşa, 2022)
Polymers are widely used as insulation materials in the electrical industry because their existing electrical and mechanical properties can be altered by adding different types of additives. Successful prediction of the ...
Cooling performance prediction of a metal foam internal heat exchanger: An artificial neural network approach
(2023)
Although HFC refrigerants have high global warming potential (GWP) values, they are preferred due to their satisfactory cooling performance and A1 fire protection classification. If possible, alternatives of HFC-type ...
Stress, strain and strain-rate cemented carbide properties determined with a fem-supported evaluation of impact test imprints
(Elsevier Sci Ltd, 2021)
Cemented carbide materials are key in tool manufacturing, nowadays widely used in cutting, forming and other manufacturing processes. Commonly applied methods for obtaining their strain-rate dependent material properties ...
Stiffening of biopolymer aerogel networks upon wetting: a model-based study
(Elsevier, 2020)
The mechanism behind the stiffening effect observed in the stress-strain response of alginate-starch aerogels upon being exposed to wetting is investigated in this paper, via a physically motivated model approach. A network ...
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)
Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ...
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)
Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ...