Ara
Toplam kayıt 8, listelenen: 1-8
Continuous monitoring of hemorrhagic brain strokes via contrast source inversion
(Institute of Electrical and Electronics Engineers Inc., 2017)
We consider the differential microwave imaging for continuous monitoring of hemorrhagic brain strokes where our aim is to determine the change of bleeding in sequential time frames. The scattered electromagnetic field is ...
Influence of urban built environment on traffic accidents: the case of Eskisehir (Turkey)
(Elsevier, 2017)
This paper explores effects of urban the built environment on traffic accidents in the context of a developing country. The basic objective of this study is to use simple and practical models to analyze traffic accidents, ...
Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two-imensional energy-dispersive detector
(Int Union Crystallography, 2017)
The full strain and stress tensor determination in a triaxially stressed single crystal using X-ray diffraction requires a series of lattice spacing measurements at different crystal orientations. This can be achieved using ...
A new spectroscopic imager for X-rays from 0.5 keV to 150 keV combining a pnCCD and a columnar CsI(Tl) scintillator
(Iop Publishing Ltd, 2017)
By combining a low noise fully depleted pnCCD detector with a columnar CsI(Tl) scintillator an energy dispersive spatial resolving detector can be realized with a high quantum efficiency in the range from below 0.5 keV to ...
Calibration-free extraction of constitutive parameters of magnetically coupled anisotropic metamaterials using waveguide measurements
(Amer Inst Physics, 2017)
A calibration-free method for extraction of electromagnetic properties of magnetically coupled anisotropic biaxial metamaterial (MM) slabs from waveguide measurements is proposed. It relies on three measurement steps (thru, ...
A lyapunov based model reference adaptive control of a quadrotor
(Ieee, 2017)
Model reference adaptive controller is proposed to control the position of a quadrotor with uncertain model parameters. The controller design procedure is provided considering position and attitude dynamics as outer and ...
SAR moving object imaging using sparsity imposing priors
(Springer, 2017)
Synthetic aperture radar (SAR) returns from a scene with motion can be viewed as data from a stationary scene, but with phase errors due to motion. Based on this perspective, we formulate the problem of SAR imaging of ...
Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
(Cambridge Univ Press, 2017)
Boron carbide (B4C) ceramic particles were used as reinforcement material to produce aluminum (Al) matrix composites by squeeze casting method. Four different B4C contents as 0, 3, 5, and 10 wt%, and three different squeeze ...