Ara
Toplam kayıt 43, listelenen: 11-20
Optimal number of remanufacturing in a circular economy platform
(Taylor & Francis Ltd, 2020)
In reducing waste and protecting natural resources benefits in a circular economy platform, performing remanufacturing tasks are complex, as it may be associated with costs such as investment, setup and disposal cost. Thus, ...
A new spectroscopic imager for X-rays from 0.5 keV to 150 keV combining a pnCCD and a columnar CsI(Tl) scintillator
(Iop Publishing Ltd, 2017)
By combining a low noise fully depleted pnCCD detector with a columnar CsI(Tl) scintillator an energy dispersive spatial resolving detector can be realized with a high quantum efficiency in the range from below 0.5 keV to ...
Spatio-temporal pedestrian accident analysis to improve urban pedestrian safety: the case of the Eskişehir motorway
(Gazi University Eti Mahallesi, 2015)
Determining pedestrian accident hotspots on road segments is a crucial part of the pedestrian safety assessment as it is used to prioritize problematic parts of a road network for in particularly planning and implementation ...
Cutting performance improvement of MTCVD coated cemented carbide inserts via appropriate heat treatment
(Elsevier, 2020)
The softening of cemented carbide at the elevated temperature of MTCVD processes results in significant reduction of their strength, and thus, high coating deformation during cutting. In this way, at interrupted cutting ...
Direct and indirect signal detection of 122 keV photons with a novel detector combining a pnCCD and a CsI(T1) scintillator
(Elsevier, 2016)
By combining a low noise fully depleted pnCCD detector with a CsI(TI) scintillator, an energy-dispersive area detector can be realized with a high quantum efficiency (QE) in the range from below 1 keV to above 100 keV. In ...
Investigation of temperature effect on the electrical properties of MWCNTs/epoxy nanocomposites by electrochemical impedance spectroscopy
(Taylor & Francis Ltd, 2020)
This study investigates the impact of the temperature exposure on the electrical properties of the multi-walled carbon nanotubes (MWCNTs)/epoxy based nanocomposites for the temperature range from 20 degrees C to 80 degrees ...
A hyperelastic constitutive model for rubber-like materials
(Springer, 2020)
Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain ...
Code-index modulation aided quadrature spatial modulation for high-rate MIMO systems
(Ieee-Inst Electrical Electronics Engineers Inc, 2019)
In this correspondence paper, a novel code-index modulation (CIM) aided quadrature spatial modulation (QSM) scheme, called CIM-QSM, is proposed for highly spectrum and energy efficient multiple-input multiple-output (MIMO) ...
Single steel strut mechanical testing: challenges and future research directions
(Taylor & Francis Ltd, 2019)
Open-cell stainless steel foams, composed of hollow struts, are excellent candidates for energy absorption and thermo-mechanical applications. The basic mechanical element responsible for the function of these foams is the ...
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier Ltd, 2021)
In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ...