Ara
Toplam kayıt 62, listelenen: 21-30
Cutting performance improvement of MTCVD coated cemented carbide inserts via appropriate heat treatment
(Elsevier, 2020)
The softening of cemented carbide at the elevated temperature of MTCVD processes results in significant reduction of their strength, and thus, high coating deformation during cutting. In this way, at interrupted cutting ...
Direct and indirect signal detection of 122 keV photons with a novel detector combining a pnCCD and a CsI(T1) scintillator
(Elsevier, 2016)
By combining a low noise fully depleted pnCCD detector with a CsI(TI) scintillator, an energy-dispersive area detector can be realized with a high quantum efficiency (QE) in the range from below 1 keV to above 100 keV. In ...
Investigation of temperature effect on the electrical properties of MWCNTs/epoxy nanocomposites by electrochemical impedance spectroscopy
(Taylor & Francis Ltd, 2020)
This study investigates the impact of the temperature exposure on the electrical properties of the multi-walled carbon nanotubes (MWCNTs)/epoxy based nanocomposites for the temperature range from 20 degrees C to 80 degrees ...
A hyperelastic constitutive model for rubber-like materials
(Springer, 2020)
Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain ...
Code-index modulation aided quadrature spatial modulation for high-rate MIMO systems
(Ieee-Inst Electrical Electronics Engineers Inc, 2019)
In this correspondence paper, a novel code-index modulation (CIM) aided quadrature spatial modulation (QSM) scheme, called CIM-QSM, is proposed for highly spectrum and energy efficient multiple-input multiple-output (MIMO) ...
Single steel strut mechanical testing: challenges and future research directions
(Taylor & Francis Ltd, 2019)
Open-cell stainless steel foams, composed of hollow struts, are excellent candidates for energy absorption and thermo-mechanical applications. The basic mechanical element responsible for the function of these foams is the ...
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier Ltd, 2021)
In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ...
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)
In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ...
The effect of SSI and impulsive motions on optimum active controlled MDOF structure
(Springer Science and Business Media Deutschland GmbH, 2021)
In this study, active controlled ten-story structures including soil-structure interaction (SSI) are investigated under different type of ground motions (near-fault and far ground motions) defined in FEMA P-695 to show the ...
Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing
(Springer London Ltd, 2020)
A metal component fabricated by additive manufacturing (AM) is generally required to be heat treated to enhance microstructural and mechanical aspects. This present study aims to contribute to the literature in understanding ...