Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 210, listelenen: 57-76
-
The effect of SSI and impulsive motions on optimum active controlled MDOF structure
(Springer Science and Business Media Deutschland GmbH, 2021)In this study, active controlled ten-story structures including soil-structure interaction (SSI) are investigated under different type of ground motions (near-fault and far ground motions) defined in FEMA P-695 to show the ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials
(Elsevier, 2021)This paper investigates the use of sawdust as fine aggregate and its influence on the properties of hardened concrete, and examines the correlation between sawdust content and hydration days. In this study, untreated wood ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Effects of the cell number and anisotropy in the open cell metal foams on the energy absorption efficiency
(Pamukkale Univ, 2020)By means of cellular structure, open cell metal foams can be used as a light-weight material, and they can absorb impact energy effectively. In this study, effects of cell number and anisotropy in 30 and 45 ppi (pores per ... -
Efficiency of deep neural networks for joint angle modeling in digital gait assessment
(Springer Open, 2021)Reliability and user compliance of the applied sensor system are two key issues of digital healthcare and biomedical informatics. For gait assessment applications, accurate joint angle measurements are important. Inertial ... -
Electrical impedance analysis of carbon nanotube/epoxy nanocomposite-based piezoresistive strain sensors under uniaxial cyclic static tensile loading
(Sage Publications Ltd, 2020)Carbon nanotubes-based nanocomposites have gained a great amount of attraction and play a key role in the realization of strain sensors owing to their remarkable physical properties. In this study, the piezoresistivity of ... -
Electromagnetic investigation of neuron growth by using pulsed electromagnetic field stimulation
(Elsevier, 2023)Electromagnetic field (EMF) applications for humans have been widely used for medical therapy for a long time. Various nerve diseases such as complex regional pain syndrome, cerebral palsy and spinal cord injuries may occur ... -
Estimation of horizontal displacements for geosynthetic reinforced soil wall
(2023)Nowadays, the geotechnical design trend is increasingly heading towards the serviceability limit state. However, the current practice in the design of geosynthetic reinforced soil (GRS) walls mostly relies on ultimate ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Heidelberg, 2020)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
Evaluation of pre‑ and post‑fre food risk by analytical hierarchy process method: a case study for the 2021 wildfres in Bodrum, Turkey
(2023)Wildfres are regarded as one of the devastating natural disturbances to natural ecosystems, and threatening the lives of many species. In July 2021, a wildfre took place in the Mediterranean region of Turkey in multiple ... -
An experimental and analytical study on the influence of superhydrophobic micro-textured surfaces on liquid wetting phenomena
(Elsevier Science Bv, 2018)Controlling dust, particle, gas or liquid attachment or motion over the surfaces is attracting many researchers to reduce losses or reach mission-specific goals. Therefore, researchers have been developing novel surfaces ... -
Experimental and computational investigation of disc brake squeal
(Institute of Noise Control Engineering, 2017)In this paper, the high frequency noise problem brake squeal observed in automotive disc brake systems is experimentally and computationally investigated. Firstly, modal testing on the components of the brake system (brake ... -
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Pergamon-Elsevier Science Ltd, 2020)In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ... -
An experimental investigation into frost accumulation over vertical finned and unfinned surfaces during impinging air flow
(American Society of Mechanical Engineers, 2020)Frost formation on evaporators negatively affects the cooling performance of refrigerators. It increases the thermal resistance between the refrigerant and air leading to a reduction in the system cooling capacity. In this ... -
Experimental study of the impact of electrospinning parameters on the electromechanical properties of strain sensitive electrospun multiwalled carbon nanotubes/ thermoplastic polyurethane nanofibers
(Taylor & Francis, 2021)Flexible strain sensitive electrospun fibrous layers have attracted widespread attention of researchers owing to their large surface area and exceptional flexibility. Herein, a detailed research on the impact of electrospinning ... -
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier Ltd, 2021)In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ... -
Explainable data-driven ensemble learning models for the mechanical properties prediction of concrete confined by aramid fiber-reinforced polymer wraps using generative adversarial networks
(2023): The current study offers a data-driven methodology to predict the ultimate strain and compressive strength of concrete reinforced by aramid FRP wraps. An experimental database was collected from the literature, on which ... -
Explainable ensemble learning data-driven modeling of mechanical properties of fiber-reinforced rubberized recycled aggregate concrete
(Elsevier, 2023)Colossal amounts of construction and demolition waste (C&D) and waste tires have become a considerable global environmental concern. To alleviate this issue, it is proposed to use crumb rubber (CR) derived from waste ... -
Explainable ensemble learning models for the rheological properties of self-compacting concrete
(MDPI-Multidisciplinary Digital Publishing Institute, 2022)Self-compacting concrete (SCC) has been developed as a type of concrete capable of filling narrow gaps in highly reinforced areas of a mold without internal or external vibration. Bleeding and segregation in SCC can be ...
