Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 210, listelenen: 42-61
-
Design criteria for a high energy Compton Camera and possible application to targeted cancer therapy
(Iop Publishing Ltd, 2015)The proposed research focuses on the design criteria for a Compton Camera with high spatial resolution and sensitivity, operating at high gamma energies and its possible application for molecular imaging. This application ... -
Design of current-mode class 1 frequency-agile filter employing CDTAs
(Ieee, 2015)In this study, in order to demonstrate the versatility of the active building block so-called current differencing transconductance amplifier (CDTA), a current-mode (CM) frequency-agile filter (FAF) application circuit is ... -
Designing robust capability-based distributed machine layouts with random machine availability and fuzzy demand/process flow information
(Springer Science and Business Media LLC, 2023)Thus far in the available literature, capability-based distributed layout (CBDL) design approaches were only developed under certain environments. Indeed, uncertainties embedded in the machine unavailability (or random ... -
Determination of local site soil conditions by microtremor measurements for sustainable buildings
(Proceedings of 3rd International Sustainable Buildings Symposium (ISBS 2017), 2018)As well known, local soil condition at a specific site affects the significant features of strong ground motion such as amplitude, frequency range and time duration. The effects of site condition depend on the properties ... -
Differential chaos shift keying assisted media-based modulation
(İstanbul Üniversitesi, 2021)This study proposes a new energy-efficient and high data-rated communication technique by combining media-based modulation (MBM) and differential chaos shift keying technique (DCSK), called DCSK–MBM. The MBM technique, ... -
Digital transportation maturity measurement
(Springer, 2023)From the past to the present, there are radical changes and developments available in technology. Therefore, following these technological developments become essential for companies and organizations for coping with ... -
Direct and indirect signal detection of 122 keV photons with a novel detector combining a pnCCD and a CsI(T1) scintillator
(Elsevier, 2016)By combining a low noise fully depleted pnCCD detector with a CsI(TI) scintillator, an energy-dispersive area detector can be realized with a high quantum efficiency (QE) in the range from below 1 keV to above 100 keV. In ... -
Drilling process and resulting surface properties of Inconel 718 alloy fabricated by selective laser melting additive manufacturing
(Elsevier B.V., 2020)One of the challenges is to produce holes with expected dimensional accuracy in metal additive manufacturing. Although post-processing is usually carried out for the additively manufactured components but improving the ... -
The efect of RCA pavements on the liquefaction‑induced settlement
(2023)The use of recycled concrete aggregates (RCA) not only reduces the demand for natural aggregates (NA) but also might improve the behavior of soil under earthquake loading. In this study, the behavior of the pavement ... -
The efect of RCA pavements on the liquefaction‑induced settlement
(Scientific Reports, 2023)The use of recycled concrete aggregates (RCA) not only reduces the demand for natural aggregates (NA) but also might improve the behavior of soil under earthquake loading. In this study, the behavior of the pavement ... -
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ... -
Effect of polymer coating on vapor condensation heat transfer
(Asme, 2020)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
The effect of SSI and impulsive motions on optimum active controlled MDOF structure
(Springer Science and Business Media Deutschland GmbH, 2021)In this study, active controlled ten-story structures including soil-structure interaction (SSI) are investigated under different type of ground motions (near-fault and far ground motions) defined in FEMA P-695 to show the ... -
Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
(Elsevier Science Bv, 2019)Micro-crystalline diamond (MCD) coatings were deposited on cemented carbide inserts at different temperatures using hot filament chemical vapor deposition technique. For investigating the effect of the developed diamond ... -
Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials
(Elsevier, 2021)This paper investigates the use of sawdust as fine aggregate and its influence on the properties of hardened concrete, and examines the correlation between sawdust content and hydration days. In this study, untreated wood ... -
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
(Cambridge Univ Press, 2013)In this study, a powder blend representing 6061 Al-alloy was first mixed with Al2O3 ceramic particles and then foamed by using the powder compact melting method. 6061-Al2O3 foams and control specimens 6061 foams (without ... -
Effects of the cell number and anisotropy in the open cell metal foams on the energy absorption efficiency
(Pamukkale Univ, 2020)By means of cellular structure, open cell metal foams can be used as a light-weight material, and they can absorb impact energy effectively. In this study, effects of cell number and anisotropy in 30 and 45 ppi (pores per ...
